ProForm PATL30706.0 To overtighten the Screws, Be careful not to overtighten the Screws

13. Attach the ground wire on the Upright Wire (28)	13
to the indicated hole in the Base (48) with a
	2	36
Silver Ground Screw (27).
Press the indicated grommet into the Right	Grommet
Upright (36).

Slide the Right Base Leg Cover (102) onto the		28
Base (48) as shown. Attach the Right Base Leg		Ground Wire
Cover with three 3/4" Screws (2). Be careful not
to pinch the Upright Wire (28). Do not over-		27
tighten the Screws.
		2
		48
		102
		2
14. Slide the Left Base Leg Cover (101) onto the	14	2
Base (48) as shown. Attach the Left Base Leg
Cover with three 3/4" Screws (2). Be careful not
to overtighten the Screws.
		2
		48
		101
		2
15. Tighten a 3/4" Screw (2) into each side of the	15
Base (48) and each Base Leg Cover (101, 102).
Be careful not to overtighten the Screws.
		48
		2
	101	102
	12