ProForm PATL30706.0 user manual Outer side of the Frame Spacer facing, Nut yet

4. See the left inset drawing. Identify the two Frame	4
Spacers (34). Open the included packet of
grease, and apply grease to both sides of both
Frame Spacers. Then, identify the outer side of
each Frame Spacer.
Hold a Frame Spacer (34) between the Right			36
Upright (36) and the Lift Frame (59), with the		47
outer side of the Frame Spacer facing the
Right Upright. Attach the Right Upright to the			33
Lift Frame with a Frame Bolt (32), an Upright
			32
Washer (33), and a Nut (47); do not tighten the
Nut yet.
	59	34
	34		36
	Outer		47
	Side
			33	32
	Inner		34
	Side
			59
5. See the left inset drawing. Identify the outer side	5
of the remaining Frame Spacer (34).
Hold the Frame Spacer (34) between the Left
Upright (31) and the Lift Frame (59), with the	31
outer side of the Frame Spacer facing the
Left Upright. Attach the Left Upright to the Lift
Frame with a Frame Bolt (32), an Upright	47	59
Washer (33), and a Nut (47); do not tighten the
Nut yet.	32
	33
	34
	34		31
	Outer		47
	Side
		32	33
	Inner		34
	Side		59
	8