ProForm PFTL94105.0 user manual Unplug the Power CORD. If the walking belt has, View

Page 24

PROBLEM: The walking belt is off-center or slips when walked on

 

SOLUTION: a. If the walking belt is off-center, first remove the key and

a

UNPLUG THE POWER CORD. If the walking belt has

 

shifted to the left, use the allen wrench to turn the left

 

rear roller bolt clockwise 1/2 of a turn; if the walking belt

 

has shifted to the right, turn the bolt counterclockwise

 

1/2 of a turn. Be careful not to overtighten the walking belt.

 

Then, plug in the power cord, insert the key, and run the

 

treadmill for a few minutes. Repeat until the walking belt is

 

centered.

 

b. If the walking belt slips when walked on, first remove the

b

key and UNPLUG THE POWER CORD. Using the allen

 

wrench, turn both rear roller bolts clockwise 1/4 of a turn.

 

When the walking belt is correctly tightened, you should be

 

able to lift each edge of the walking belt 3 to 4 inches off

 

the walking platform. Be careful to keep the walking belt

 

centered. Then, plug in the power cord, insert the key, and

 

walk on the treadmill for a few minutes. Repeat until the

 

walking belt is properly tightened.

 

PROBLEM: The displays of the console do not function properly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SOLUTION: a. Remove the key from the console and UNPLUG THE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

a

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

POWER CORD. Next, remove the screws from the hood

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1/8”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and carefully remove the hood. Locate the Reed Switch

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(17) and the Magnet (12) on the left side of the Pulley (11).

 

 

 

 

 

17

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Turn the Pulley until the Magnet is aligned with the Reed

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Switch. Make sure that the gap between the Magnet

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and the Reed Switch is about 1/8”. If necessary, move

 

 

 

Top

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the Reed Switch slightly using a slotted screwdriver. Re-at-

 

 

View

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

tach the hood and run the treadmill for a few minutes to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

check for a correct speed reading.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PROBLEM: Television reception is poor

SOLUTION: a. For the television to operate properly, good reception is necessary. If you are using an antenna, make sure that it is properly connected and adjusted for optimal reception. (See HOW TO CON- NECT AN ANTENNA on page 9.)

b. Check for the problems listed below and follow the applicable instructions.

Ignition (black spots or horizontal streaks that appear or a picture that flutters or drifts)—Usually this is caused by interference from automobile ignition systems, neon lamps, electric drifts, or other electric appliances. Try changing the position of the treadmill or other electric appliances to correct the problem.

Ghosts—Ghosts are caused by the television signal following two paths—one is the direct path and the other is reflected from tall buildings, hills, or other objects. Change the direction or posi- tion of the antenna to improve reception.

Blue Screen—If the treadmill is located in the fringe area of a television station where the signal is weak, the picture may be of poor quality or a blue screen may appear. If the signal is weak, it may be necessary to install an external antenna to improve the picture.

Note: If one of these symptoms appears when the cable from a CATV company is connected, the symptom may be caused by the local company broadcast.

24

Image 24
Contents QUESTIONS? Model No. PFTL94105.0 Serial NoCall TOLL-FREE Table of Contents Important Precautions Page Power Lines Before YOU Begin Right SideAssembly Page HOW to Connect AN Antenna HOW to Connect a 75 OHM Catv CableHOW to Connect a VCR HOW to Plug in the Power Cord Treadmill OperationPRE-LUBRICATED Walking Belt Features of the Console HOW to Turn on the Power HOW to USE the Manual ModeMeasure your heart rate if desired Turn on the fan if desiredHOW to USE a Preset Program Select a preset programFollow your progress with the displays HOW to Create a Custom Program Select a custom programHOW to USE a Custom Program HOW to USE a Heart Rate Program Select a heart rate programEnter your age Hold the handgrip pulse sensor HOW to Operate the Personal Television Press the Power button to turn on TelevisionPress the Volume buttons to adjust the volume HOW to USE the Information ModePress the Power button again and add or Delete channels HOW to Adjust the Cushioning SystemHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Unplug the Power CORD. If the walking belt has Problem Television reception is poorView Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyR0206A Qty DescriptionQty Exploded DRAWING-Model No. PFTL94105.0 140 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT

PFTL94105.0 specifications

The ProForm PFTL94105.0 treadmill is a standout fitness machine designed to deliver an engaging and seamless workout experience for runners of all levels. Its combination of advanced technology, versatile features, and durable construction makes it a fit for home gyms, ensuring that users can enjoy effective cardiovascular workouts without leaving their homes.

One of the most notable features of the PFTL94105.0 is its sturdy frame and impressive running surface. The treadmill boasts a generous 20-inch by 55-inch running area, providing ample space for users to run or walk comfortably. The treadmill is also equipped with ProForm’s patented ProShox™ cushioning system, which helps to reduce the impact on joints, allowing for a more comfortable running experience and minimizing the risk of injury over time.

In terms of technology, the PFTL94105.0 offers an interactive training experience through the integration with iFit technology. This enables users to access a vast library of workouts led by expert trainers, including global routes where users can jog through scenic landscapes virtually. The interactive capability also allows for customized workout plans, catering to individual fitness goals and preferences.

A noteworthy characteristic of this treadmill is its adjustable incline feature. Users can adjust the incline up to 10% to simulate hill training, which boosts calorie burn and enhances workout intensity. This feature is particularly beneficial for those looking to improve their running strength and stamina.

The ProForm PFTL94105.0 also comes with built-in performance metrics, including speed, distance, time, and calories burned, displayed on a vibrant LCD screen. This allows users to monitor their progress in real-time. Additionally, the treadmill is equipped with Bluetooth speakers, enabling users to play their favorite music or workout playlists for added motivation.

To enhance convenience, the treadmill features an easy-to-fold design, making it easy to store away when not in use. Its space-saving characteristic is ideal for home environments where space may be limited.

In summary, the ProForm PFTL94105.0 treadmill combines durability, advanced technology, and thoughtful design to provide an exceptional workout experience. With features like ProShox™ cushioning, adjustable incline, and iFit compatibility, this treadmill is well-equipped to meet the diverse needs of fitness enthusiasts looking to enhance their health and fitness journey at home.