ProForm PFTL79510.0 warranty Assembly, Wrench Scissors

Page 6

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubri- cant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys

and your own Phillips screwdriver

, adjustable

wrench

, and scissors

.

 

 

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. To avoid dam- aging parts, do not use power tools for assembly. Extra hardware may be included.

1/4" Star

5/16" Flat

5/16" Star

3/8" Star

 

3/8" Nut (12)–2

Washer (35)–6

Washer (113)–4

Washer (11)–4

Washer (13)–4

 

#8 x 1/2" Screw

#8 x 1/2" Ground

#8 x 3/4" Screw

#10 x 3/4" Screw

#10 x 3/4" Flat

(1)–18

Screw (10)–1

(2)–8

(9)–2

 

Head Screw (112)–2

5/16" x 1"

5/16" x 1 1/4"

3/8" x 1 1/4" Bolt (8)–4

3/8" x 1 3/4" Bolt (6)–1

Bolt (5)–4

Bolt (4)–2

1/4" x 1/2"

3/8" x 2" Bolt (3)–1

3/8" x 2 3/4" Bolt (7)–4

Bolt (36)–4

 

 

6

 

 

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT QUESTIONS?Model No. PFTL79510.0 Serial No On the WEBTable of Contents Important Precautions Save These InstructionsBefore YOU Begin Assembly Wrench ScissorsMake sure that the power cord is unplugged See the inset drawing. Tie the wire tieBe careful not to pinch the Upright Tighten the Bolts yet Attach the Right Upright not shownBase Covers into place yet Attach the Right Handrail 87 in the same way Important To avoid damaging Shown. Start all four Screws, and then tighten Each of themAgain. if YOU do not Connect the CON All four Bolts, and then tighten each ThemPage Raise the Frame 56 to the position shown Page Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the Console HOW to Turn on the Power HOW to USE the Manual ModePage Measure your heart rate if desired. Before using Turn on the fan if desiredHOW to USE AN Onboard Workout Select an onboard workoutStart the workout Select an iFit Live workout HOW to USE AN Ifit Live WorkoutSelect a user Start the workout. See onConnect your iPod HOW to USE a NIKE+ ModuleInsert the Nike+ module into the console Record your workout informationInformation Mode HOW to USE the Stereo Sound System Make sure that the audio wire is fully pluggedHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useCompatible with GFCI-equipped outlets Problem The walking belt slows when walked on TopProblem Solution Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. PFTL79510.0 R1010AQty Exploded Drawing A-Model No. PFTL79510.0 R1010A Exploded Drawing B-Model No. PFTL79510.0 R1010A Exploded Drawing C-Model No. PFTL79510.0 R1010A Exploded Drawing D-Model No. PFTL79510.0 R1010A Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT
Top Page Image Contents