ProForm PFTL81910.1 warranty See the inset drawing. Tie the wire tie

3. Identify the Left Upright (89), which is marked	3
“Left.” Have a second person hold the Left			81
Upright near the Base (94).				89
See the inset drawing. Tie the wire tie in the
Left Upright (89) securely around the end of the				Wire
Upright Wire (81). Then, pull the other end of the					81
wire tie until the Upright Wire is routed through				Tie
the Left Upright.			Wire
	89		Tie
			81	94
4. Hold the Left Upright (89) against the Base	4
(94). Be careful not to pinch the wires. Insert
two 3/8" x 2 3/4" Screws (7) and two 3/8" x 1
1/4" Screws (8) with two 3/8" Star Washers (13)
into the Left Upright.
Partially tighten the 3/8" x 2 3/4" Screws (7) and		89
the 3/8" x 1 1/4" Screws (8) until the heads of
the Screws touch the Left Upright (89); do not
fully tighten the Screws yet.
Attach the Right Upright (not shown) in the
same way. Note: There are no wires on the		7
right side.
	13
	8	13	94
	8