ProForm PFTL57105.0 user manual Information MODE/DEMO Mode, Optional Chest Pulse Sensor

Page 18

THE INFORMATION MODE/DEMO MODE

The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also al- lows you to select miles or kilometers as the unit of measurement and to turn on and turn off the demo mode.

To select the information mode, hold down the Stop button while inserting the key into the console. When the information mode is selected, the following informa- tion will be shown in the display:

The left side of the display

 

 

will show the total number of

 

 

miles (or kilometers) that the

Miles

 

walking belt has moved and

Hours

the total number of hours

 

 

that the treadmill has been

used. An “E” for english miles or an “M” for metric kilo- meters will appear in the right side of the display. Press the Speed increase button to change the unit of mea- surement.

IMPORTANT: If a “d” appears in the right side of the display, the console is in the “demo” mode. This mode is intended to be used only when a treadmill is dis- played in a store. When the console is in the demo mode, the power cord can be plugged in, the key can

be removed from the console, and the indicators in the display will automatically appear in a preset sequence, although the buttons on the console will not operate. If a “d” appears when the information mode is selected, press the Speed decrease button so “d” disap- pears.

To exit the information mode, remove the key from the console.

THE OPTIONAL CHEST PULSE SENSOR

An optional chest pulse sensor adds even more fea- tures to the console. The chest pulse sensor offers hands-free operation, and enables you to use the con- sole’s two pulse control programs. To purchase the optional chest pulse sensor, call the toll-free tele- phone number on the front cover of this manual.

18

Image 18
Contents QUESTIONS? Model No. PFTL57105.0 Serial NoCall TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Right SideBack Assembly Make sure that the power cord is unpluggedNut the Wheel must turn freely Make sure that no wires are pinched. Hand Endcaps are oriented exactly as shown Top View 107 Wire Cylinder 108 Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeTinue to hold the contacts for about 15 sec Handrail-avoid moving your hands. When yourFor the most accurate heart rate reading, con OndsHOW to USE a Preset Program Select one of the six preset programsHOW to USE a Pulse Control Program Select a pulse control programFollow your progress with the display Information MODE/DEMO Mode Optional Chest Pulse SensorHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Top Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Page R0605A DescriptionQty Description Exploded DRAWING-Model No. PFTL57105.0 108 101 100 107 109 111 110 104 105 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT