ProForm PFTL54706.0 user manual

Page 4

21.Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See ASSEMBLY on page 6 and HOW TO FOLD AND MOVE THE TREADMILL on page 21.) You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

22.When folding or moving the treadmill, make sure that the storage latch is fully closed.

23.Do not change the incline of the treadmill by placing objects under the treadmill.

24.Inspect and properly tighten all parts of the treadmill regularly.

25.Never drop or insert any object into any opening on the treadmill.

26.This treadmill is intended for in-home use only. Do not use this treadmill in a commer- cial, rental, or institutional setting.

27.DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill, and before performing the main- tenance and adjustment procedures de- scribed in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the procedures in this manual should be performed by an authorized service representative only.

WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decals shown here have been placed on the tread- mill. If a decal is missing, or if it is not legible, call the toll-free telephone number on the front cover of this man- ual and order a free replacement decal. Apply the decal in the location shown. Note: The decals are not shown at actual size.

4

Image 4
Contents Model No. PFTL54706.0 Serial No QUESTIONS?Call TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Assembly Make sure that the power cord is unpluggedPage Outer side of the Frame Spacer facing Washer 9 do not tighten the Colored Patch Frame Bolt yetConsole Wire Bracket Tie Large Hole Overtighten the Belly Pan Screws Top View HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeMeasure your heart rate if desired Turn on the fan if desiredSelect one of the six cross training programs HOW to USE a Cross Training ProgramPress the Start button to start the program Perform the first strength exercise when Prompted Continue the cross training programHOW to USE a Preset Program Select a preset programFollow your progress with the display Information Mode Optional Chest Pulse SensorHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Maintenance and Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Conditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches R1006A Key Qty DescriptionExploded Drawing A-Model No. PFTL54706 Exploded Drawing B-Model No. PFTL54706.0 R1006A Exploded Drawing C-Model No. PFTL54706.0 R1006A Exploded Drawing D-Model No. PFTL54706.0 R1006A Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT