ProForm PFTL54706.0 user manual Assembly, Make sure that the power cord is unplugged

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

In addition to the included hex keys , assembly requires a phillips screwdriver			, an
adjustable wrench	, and needlenose pliers	.

Use the drawings below to identify the hardware used during assembly. Note: If a part is not in the parts bag, check to see if it has been preattached to one of the parts to be assembled. Extra hardware may be in- cluded. To avoid damaging plastic parts, do not use power tools for assembly.

Base Pad	Crossbar Screw	Console Screw/		Ground Screw	Bellypan Screw	Handrail Bolt
Screw (26)–6	(85)–2	Latch Screw (10)–6		(84)–1	(20)–2
						(8)–6
Crossbar Star					Wheel Housing Bolt (13)–4
Washer (7)–2			Wheel Housing
	Upright Washer		Nut (43)–4
	(14)–2
Handrail Star
Washer (5)–6				Upright Bolt/Lift Frame Bolt (2)–4
	Wheel Housing		Nut (16)–4
	Washer (32)–4
Upright Star
Washer (9)–6				Colored Patch Frame Bolt (1)–2

1.Make sure that the power cord is unplugged.

Have a second person hold the Base (52) in the position shown.

Attach six Base Pads (63) to the Base (52) with six Base Pad Screws (26).

1		26
	26	63
			26
	63
			63
	52		26
		26	63
		63
6