ProForm PFTL49609.0 user manual Firmly tighten the Bolts

7. Press a Front Handrail Cap (106) into the Left	7
Handrail (110). Attach the Front Handrail Cap
with a #8 x 3/4" Endcap Screw (16).								106
Slide the Left Collar (75) onto the Left Upright
(76). Align the large holes in the Left Collar
with the large holes in the Left Upright. Set							16
the Left Handrail (110) on the Left Collar.
Attach the Left Handrail (110) with two 3/8" x
1 1/4" Bolts (7) and two 3/8" Star Washers (9).		110
Firmly tighten the Bolts.
Tighten two #8 x 3/4" Screws (12) into the Left					9	12
Collar (75).				75			7
				76
8. Insert the Upright Wire (79) through the Right	8
Collar (84). Slide the Right Collar onto the Right
Upright (81).					16			106
Hold the Right Handrail (109) near the Right				Large
Upright (81). Insert the Upright Wire (79) into the			79	Hole
hole in the bottom of the Right Handrail and pull
it out of the large hole in the side of the Right	Plastic Tie
Handrail.
See the inset drawing. Insert the included plas-	7	9
tic tie through the holes in the Right Handrail
(109) as shown. Look inside the Right Handrail.					84
Make sure that the plastic tie holds the
Upright Wire (79) to the side as shown in the
inset drawing. Tighten the plastic tie.		109		12
Press a Front Handrail Cap (106) into the Right							Hole
Handrail (109). Attach the Front Handrail Cap				81		10		Tie
with a #8 x 3/4" Endcap Screw (16).
Attach the Right Handrail (109) with two 3/8" x 1								79
1/4" Bolts (7) and two 3/8" Star Washers (9).
Firmly tighten the Bolts.								84
Tighten two #8 x 3/4" Screws (12) into the Right						Hole
Collar (84).
	10