
5.With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (51) so the treadmill is more stable; do not fully fold the Frame yet.
Remove and discard the two indicated bolts (A) and the shipping bracket (B).
Attach a Base Pad (88) to the Base (86) in the location shown with a #8 x 1" Tek Screw (2) and a Base Pad Spacer (13). Then, attach another Base Pad (88) with only a #8 x 1" Tek Screw
(2).
Attach a Wheel (87) with a 3/8" x 2" Bolt (4) and a 3/8" Nut (8). Do not overtighten the Nut; the
Wheel must turn freely.
6.Press a Base Cap (82) into the Base (86). Set the Left Upright Spacer (83) on the Base (86). Hold a Bolt Spacer (80) inside the lower end of the Left Upright (76). Insert a 3/8" x 4" Bolt (6) with a 3/8" Star Washer (9) into the Left Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (80), 3/8" x 4" Bolt (6), and 3/8" Star Washer (9). Set the Left Upright in the Left Upright Spacer.
Partially tighten the 3/8" x 4" Bolts (6); do not fully tighten the Bolts yet.
With the help of a second person, tip the tread- mill so that the Base (86) is flat on the floor.
| 5 | A | 
 | B | 
 | 
 | 
| 
 | 
 | 
 | 
 | ||
| 
 | 88 | 
 | 
 | 51 | 4 | 
| 
 | 2 | 
 | 
 | ||
| 
 | 
 | 8813 | 
 | ||
| 
 | 86 | 
 | 87 | 
 | |
| 
 | 
 | 
 | 2 | 8 | |
| 
 | 
 | 
 | 
 | ||
| 
 | 
 | 
 | 
 | 
 | |
| 6 | 
 | 
 | 6 | 
 | 
 | 
| 
 | 82 | 9 | 
 | 76 | 
 | 
| 
 | 83 | 
 | 
 | ||
| 
 | 
 | 
 | 
 | 
 | |
| 
 | 80 | 86 | 
 | 
 | 
 | 
| 
 | 
 | 
 | 
 | 
 | 
9