ProForm PFTL49908.0 user manual Again. if the Connectors are not CON, That no wires are pinched

Page 11

13. Have a second person hold the console assem-

13

 

 

Console Assembly

 

bly near the Right Upright (89).

 

 

 

Connect the Wire Harness (88) to the console

 

 

 

 

 

 

 

wire. See the inset drawing. The connectors

 

 

 

 

 

 

 

should slide together easily and snap into

 

 

 

 

 

 

 

place. If they do not, turn one connector and try

 

 

 

 

 

 

 

again. IF THE CONNECTORS ARE NOT CON-

 

 

 

 

 

 

 

NECTED PROPERLY, THE CONSOLE MAY

 

 

 

 

 

 

 

BE DAMAGED WHEN THE POWER IS

 

 

 

 

 

 

 

TURNED ON. Remove the long tie from the Wire

 

 

 

 

 

 

 

Harness and the tie from the console wire. Then,

 

 

 

 

 

 

 

insert the connectors into the Right Upright (89).

 

 

 

 

 

 

 

Set the console assembly on the Right Upright

Tie

 

Console Wire

Console

 

(89) and the Left Upright (not shown). Make sure

 

 

that no wires are pinched.

88

 

 

Long

Wire

 

 

 

 

89

Tie

 

 

 

 

 

 

 

88

 

14. Tighten six M8 x 25mm Bolts (5) with six M8

14

 

 

 

 

 

 

Star Washers (10) into the Uprights (85, 89) and

 

 

 

 

 

 

the Handrails (99, 101). Start all six Bolts be-

 

 

 

 

104

 

 

fore tightening any of them.

 

 

 

 

106

 

See steps 5 and 8. Tighten the four M10 x

Console

 

 

 

 

 

95mm Bolts (8).

Assembly

 

 

 

 

 

 

Press the Left Accessory Tray (104) and Right

 

 

 

 

 

 

 

Accessory Tray (106) into the console assem-

99

 

 

 

 

 

 

bly.

 

 

 

 

 

 

 

10

5

10

5

5

10

 

 

85

 

 

101

 

10

5

 

 

 

 

 

 

89

 

 

11

 

 

 

 

 

 

Page 10 Page 12
Image 11
Page 10 Page 12
Contents On the WEB QUESTIONS?Model No. PFTL49908.0 Serial No Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Important Precautions Cord immediately after use, before cleaning Before YOU Begin Assembly Nut the Wheel must turn freely. Discard Make sure that the power cord is unpluggedDo not fully fold the Frame yet Bolts yet Fully tighten the Bolts yet Tighten the Nut the Wheel must turn freelyScrews 1. Do not overtighten the Screws Sembly. Make sure that no wires are pinchedSix Screws before tightening any of them Fore tightening any of them Again. if the Connectors are not CONThat no wires are pinched Make sure that no wires are pinched PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Features of the Console Console DiagramStart the walking belt HOW to Turn on the PowerHOW to USE the Manual Mode Insert the key into the consoleMeasure your heart rate if desired Select a weight loss workout HOW to USE the Weight Loss CenterHOW to USE a Classic Workout Optional Chest Pulse Sensor HOW to USE the Stereo Sound SystemInformation Mode HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Lower the Treadmill for USE Compatible with GFCI-equipped outlets TroubleshootingProblem The power does not turn on Problem The power turns off during useTop Problem The walking belt slows when walked onProblem Solution Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part LIST-Model No. PFTL49908.0Qty 46 72 Exploded Drawing B-Model No. PFTL49908.0 R1008A Exploded Drawing C-Model No. PFTL49908.0 R1008A Exploded Drawing D-Model No. PFTL49908.0 Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty

PFTL49908.0 specifications

The ProForm PFTL49908.0 is a high-quality treadmill designed to cater to fitness enthusiasts looking for a reliable and effective workout solution at home. Known for its robust build and advanced features, it stands out as a versatile machine for both beginners and seasoned athletes.

One of the standout features of the PFTL49908.0 is its spacious 20-inch by 55-inch tread belt. This generous surface area provides ample room for comfortable strides, minimizing the risk of tripping or feeling confined while running or walking. Coupled with an adjustable incline feature, users can simulate hill training and elevate their workouts, targeting different muscle groups for a comprehensive fitness routine.

In terms of technology, the treadmill is equipped with a user-friendly console that incorporates a vibrant display. This screen tracks essential metrics such as speed, time, distance, calories burned, and heart rate, allowing users to monitor their progress in real time. Additionally, the ProForm PFTL49908.0 features built-in workout programs designed by certified personal trainers. These programs offer various training options that cater to different fitness levels and goals, providing users with a structured approach to their workouts.

Another significant characteristic of this model is its compatibility with iFit technology. With iFit, users can access a vast library of interactive workouts, personalized training regimens, and real-time statistics. The treadmill can even auto-adjust its incline and speed based on the chosen workout, offering a guided and immersive training experience.

The ProForm PFTL49908.0 also prioritizes user comfort. It is designed with ProShox cushioning, which helps to reduce impact on joints, making running or walking easier on the body. This feature is especially beneficial for users who may be recovering from injuries or those who prefer a more cushioned running experience.

Finally, the treadmill's foldable design allows for easy storage in smaller spaces, making it ideal for home gyms that may lack space. The wheel-based design further enhances portability, enabling easy movement and stowing once workouts are completed.

In summary, the ProForm PFTL49908.0 offers a robust blend of features, technology, and user-centered design, making it an excellent choice for those looking to elevate their fitness journey from the comfort of their home.
Top Page Image Contents