ProForm PFTL59822 user manual Solution, Unplug the Power Cord

Page 25

Locate the Reed Switch (18) and the Magnet (101) on the left side of the Pulley (78). Turn the Pulley until the

Magnet is aligned with the Reed Switch.

Make sure

that the gap between the Magnet and the Reed

 

Switch is about 1/8”.

If necessary, loosen the Screw

(24)and move the Reed Switch slightly. Retighten the Screw. Re-attach the hood, and run the treadmill for a few minutes to check for a correct speed reading.

PROBLEM: The walking belt slows when walked on

1/8”

78

24

 

18

101

Top

 

View

 

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 9.

b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be-

come damaged. Remove the key andUNPLUG THE

POWER CORD . Using the allen wrench, turn both rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, in- sert the key, and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b

3”–4”

 

Rear Roller Adjustment Bolts

c. If the walking belt still slows when walked on, please call our toll-free Customer Service Department.

PROBLEM: The walking belt is off-center or slips when walked on

SOLUTION:

a. If the walking belt is off-center, first remove the key

 

 

and UNPLUG THE POWER CORD

. If the walking

 

belt has shifted to the left,

use the allen wrench to

 

turn the left rear roller bolt clockwise 1/2 of a turn;

if

 

the walking belt has shifted to the right,

 

turn the

 

bolt counterclockwise 1/2 of a turn. Be careful not to

 

 

overtighten the walking belt. Plug in the power cord,

 

 

insert the key and run the treadmill for a few minutes.

 

 

Repeat until the walking belt is centered.

 

 

b. If the walking belt slips when walked on, first remove

 

 

the key and

UNPLUG THE POWER CORD

. Using

 

the allen wrench, turn both rear roller bolts clockwise,

 

 

1/4 of a turn. When the walking belt is correctly tight-

 

 

ened, you should be able to lift each side of the walk-

 

 

ing belt 3 to 4 inches off the walking platform. Be

 

 

careful to keep the walking belt centered. Plug in the

 

 

power cord, insert the key and carefully walk on the

 

 

treadmill for a few minutes. Repeat until the walking

 

 

belt is properly tightened.

 

 

a

b

PROBLEM: The incline of the treadmill does not change correctly or does not change when iFIT.com

CDs and videos are played

SOLUTION:

a. With the key inserted in the console, press one of the Incline buttons.

While the incline is

 

changing, remove the key.

After a few seconds, re-insert the key. The treadmill will automati-

 

cally rise to the maximum incline level and then return to the minimum level. This will recalibrate

 

 

the incline system.

 

 

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Model No. PFTL59822 Serial No QUESTIONS?Free Customer HO Customer HOT LineTable of Contents Important Precautions Never insert or drop any object into any opening For your benefit, read this manual carefully before Before YOU BeginLeft Side No wires are pinched AssemblySembled Does not fall into the Right UprightInsert two 1/2 Screws 33 into Attach the Handgrip Extension with113 Leave loose Post Open side Bosses Handgrip Extension with a rubber mallet to fully insert itKeep the included allen Under the treadmillPerformant Lube HOW to Plug in the Power CordOrder part number This product must be grounded.If it should malfuncFeatures of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerTime/Incline/Segment See page 21 and turn off the demo modeDisplay Measure your heart rate, if desiredSelect one of the personal trainer programs HOW to USE Personal Trainer ProgramsPress the Start button or the Speed Start the programHOW to USE Heart Rate Programs Program Enter your ageKey from the console HOW to Connect Your Portable Stereo HOW to Connect Your Portable CD PlayerCassettes HOW to Connect Your Computer HOW to Connect Your Home StereoJack on your stereo Phones jack, see instruction BHOW to Connect Your VCR Adjust the volume of your CD player or VCR Next settings of the CD or video programSee on Next settings for the program HOW to USE Programs Directly from OUR WEB SiteFollowprogram.the on-line instructions to start Return to the treadmill and stand on the footPlay should be blank Information MODE/DEMO ModeIf a d ap Speed Button so the display is blankHOW to Move the Treadmill HOW to Fold the Treadmill for StorageMake sure that the catch is securely held by the pin Hold the treadmill firmly with both hands, and lower HOW to Lower the Treadmill for USEPin Catch Tripped Reset TroubleshootingProblem The power turns off during use Problem The thumb pulse sensor does not function properlyUnplug the Power Cord SolutionExercise Intensity Conditioning GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Tek Screw Part Identification ChartTek Screw Description No. Qty KeyModelDRAWING Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Part No R0603A

PFTL59822 specifications

The ProForm PFTL59822 is a state-of-the-art treadmill designed for fitness enthusiasts seeking a versatile and effective workout experience. This model combines functionality with advanced technology, making it an ideal choice for users aiming to improve their cardiovascular health and overall fitness.

One of the standout features of the PFTL59822 is its powerful 2.75 CHP motor, which supports a wide range of workout intensities. Whether you're walking, jogging, or running, this motor delivers reliable performance, ensuring smooth operation throughout your exercise sessions. Paired with a spacious running surface of 20 inches by 55 inches, users can enjoy a comfortable and safe workout, accommodating various stride lengths.

The treadmill also includes an adjustable incline, allowing users to increase the intensity of their workouts. With a range of incline settings, the PFTL59822 helps simulate hill training, which can significantly enhance calorie burning and muscle engagement. This feature is particularly beneficial for those looking to add variety to their routine.

Additionally, the ProForm PFTL59822 incorporates advanced technology to enrich the workout experience. The built-in 7-inch Smart HD touchscreen is not only easy to use but also provides access to a plethora of interactive workout programs. Users can choose from engaging workout options tailored to their fitness goals, keeping motivation high. The treadmill is also iFit compatible, allowing users to access an expansive library of live and on-demand workouts led by professional trainers.

For user comfort, the treadmill includes ProShox cushioning technology, which reduces impact on joints and provides a more comfortable running experience. This feature is especially beneficial for runners or those with previous injuries, as it minimizes strain while maximizing workout effectiveness.

Moreover, the PFTL59822 is equipped with an integrated sound system, enabling users to listen to their favorite music or podcasts during workouts. The spacious console offers additional storage for devices like tablets, further enhancing convenience during exercise.

In summary, the ProForm PFTL59822 treadmill is a well-rounded fitness machine that combines a robust motor, adjustable incline, advanced technology, and user comfort features. Its compatibility with iFit, combined with its cushioning and entertainment options, positions it as a top choice for anyone looking to achieve their fitness aspirations from the comfort of home.
Top Page Image Contents