ProForm PFTL59822 Assembly, Sembled, No wires are pinched, Does not fall into the Right Upright

Page 6

ASSEMBLY

Assembly requires two persons.

 

Set the treadmill in a cleared area and remove all packing materials;

do not

dispose of the packing materials until assembly is completed.

 

 

Assembly requires the included allen wrench

and your own phillips screwdriver

, adjustable

 

wrench

, and rubber mallet

.

 

 

Use the PART IDENTIFICATION CHART in the center of this manual to identify small parts as you assem- ble the treadmill. The assembly hardware is found into separate bags; each bag is marked to show which assembly step uses the hardware in that bag. Note: Some bags may include extra hardware.

1.Read the information at the top of this page before beginning. Do not plug in the power cord until all as- sembly steps are completed.

With the help of a second person, carefully tip the treadmill onto its left side as shown. Partially fold the

Frame (51) so that the treadmill will be more stable.Do not fully fold the treadmill until it is completely as-

sembled.

Attach six Base Pads (44) to the bottom of the Base

(116) with six 1” Tek Screws (13). Note: Only three Base Pads and Tek Screws are shown.

2.Identify the Right and Left Uprights (55, 64); the Left Upright has two small holes near the square post. See drawing 2a. Make sure that there are two U-nuts (100) in the lower end of each Upright.

Hold the Right Upright (55) near the Base (116), and orient

the Right Upright as shown.

Make sure that the Right

Upright bends in the direction shown.

 

Straighten the

Wire Harness (49), and feed it into the lower end of the

Right Upright and out of the upper end.

Make sure that

no wires are pinched.

Hand tighten two Upright Bolts

(112)with Star Washers (111) into the bottom of the Base (116) and the lower end of the Right Upright.

Attach the Left Upright (64) as described above. Note:

There is not a wire harness on the left side.

3.With the help of a second person, carefully tip the tread- mill down so that the Uprights (55, 64 [not shown]) are vertical. Make sure that the end of the Wire Harness

(49)does not fall into the Right Upright.

Set the Console Base (38) on the Right Upright (55) as

 

shown. Check the pins in the connector on the end of the

 

Wire Harness (49) and make sure that they are straight.

 

Connect the Wire Harness to the indicated connector on

 

the back of the Console Base.

Make sure to insert the

 

connectors properly (see the inset drawing). The con-

 

nectors should slide easily and snap into place.

If the

connectors do not slide easily and snap into place, turn a

 

connector and try again.

 

 

1

 

 

 

51

 

13

 

 

44

 

 

 

116

 

 

 

44

 

13

 

2

116

 

 

55

 

Holes

 

Bend

 

112 111

 

 

49

 

64

 

 

2a

 

 

55, 64

 

 

100

3

 

 

 

38

49

 

 

 

 

49

 

 

55

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Free Customer HO QUESTIONS?Model No. PFTL59822 Serial No Customer HOT LineTable of Contents Important Precautions Never insert or drop any object into any opening Before YOU Begin For your benefit, read this manual carefully beforeLeft Side Sembled AssemblyNo wires are pinched Does not fall into the Right Upright113 Leave loose Post Open side Bosses Attach the Handgrip Extension withInsert two 1/2 Screws 33 into Handgrip Extension with a rubber mallet to fully insert itUnder the treadmill Keep the included allenOrder part number HOW to Plug in the Power CordPerformant Lube This product must be grounded.If it should malfuncConsole Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeDisplay See page 21 and turn off the demo modeTime/Incline/Segment Measure your heart rate, if desiredPress the Start button or the Speed HOW to USE Personal Trainer ProgramsSelect one of the personal trainer programs Start the programHOW to USE Heart Rate Programs Enter your age ProgramKey from the console HOW to Connect Your Portable CD Player HOW to Connect Your Portable StereoCassettes Jack on your stereo HOW to Connect Your Home StereoHOW to Connect Your Computer Phones jack, see instruction BHOW to Connect Your VCR Next settings of the CD or video program Adjust the volume of your CD player or VCRSee on Followprogram.the on-line instructions to start HOW to USE Programs Directly from OUR WEB SiteNext settings for the program Return to the treadmill and stand on the footIf a d ap Information MODE/DEMO ModePlay should be blank Speed Button so the display is blankHOW to Fold the Treadmill for Storage HOW to Move the TreadmillMake sure that the catch is securely held by the pin HOW to Lower the Treadmill for USE Hold the treadmill firmly with both hands, and lowerPin Catch Problem The power turns off during use TroubleshootingTripped Reset Problem The thumb pulse sensor does not function properlySolution Unplug the Power CordWorkout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Part Identification Chart Tek ScrewTek Screw Key Description No. QtyModelDRAWING Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty Part No R0603A

PFTL59822 specifications

The ProForm PFTL59822 is a state-of-the-art treadmill designed for fitness enthusiasts seeking a versatile and effective workout experience. This model combines functionality with advanced technology, making it an ideal choice for users aiming to improve their cardiovascular health and overall fitness.

One of the standout features of the PFTL59822 is its powerful 2.75 CHP motor, which supports a wide range of workout intensities. Whether you're walking, jogging, or running, this motor delivers reliable performance, ensuring smooth operation throughout your exercise sessions. Paired with a spacious running surface of 20 inches by 55 inches, users can enjoy a comfortable and safe workout, accommodating various stride lengths.

The treadmill also includes an adjustable incline, allowing users to increase the intensity of their workouts. With a range of incline settings, the PFTL59822 helps simulate hill training, which can significantly enhance calorie burning and muscle engagement. This feature is particularly beneficial for those looking to add variety to their routine.

Additionally, the ProForm PFTL59822 incorporates advanced technology to enrich the workout experience. The built-in 7-inch Smart HD touchscreen is not only easy to use but also provides access to a plethora of interactive workout programs. Users can choose from engaging workout options tailored to their fitness goals, keeping motivation high. The treadmill is also iFit compatible, allowing users to access an expansive library of live and on-demand workouts led by professional trainers.

For user comfort, the treadmill includes ProShox cushioning technology, which reduces impact on joints and provides a more comfortable running experience. This feature is especially beneficial for runners or those with previous injuries, as it minimizes strain while maximizing workout effectiveness.

Moreover, the PFTL59822 is equipped with an integrated sound system, enabling users to listen to their favorite music or podcasts during workouts. The spacious console offers additional storage for devices like tablets, further enhancing convenience during exercise.

In summary, the ProForm PFTL59822 treadmill is a well-rounded fitness machine that combines a robust motor, adjustable incline, advanced technology, and user comfort features. Its compatibility with iFit, combined with its cushioning and entertainment options, positions it as a top choice for anyone looking to achieve their fitness aspirations from the comfort of home.
Top Page Image Contents