JVC RX-6020VBK manual Press Control UP, Adjust the speaker output levels 10 to +10, Tone

Page 25
SURROUND MODE

Creating Realistic Sound Fields

English

3

4

Press SOUND.

10 keys are activated for sound adjustments.

Press TEST to check if you can hear the sounds through all the speakers at the equal level.

“TEST TONE L” starts flashing on the display, and a test tone comes out of the speakers in the following order:

SOUND

TEST

1

3Adjust the speaker output levels.

1) Press ADJUST repeatedly until one

ADJUST

 

of the following indications (with the

 

 

 

 

 

 

 

 

 

 

 

 

current setting)* appears on the

 

 

 

display.

 

 

 

 

 

 

 

 

CENTER :To adjust the center speaker output level

 

 

(–10 to +10).

 

 

 

 

 

 

 

 

 

TEST TONE L

TEST TONE C

 

 

TEST TONE R

 

 

(Left front speaker)

(Center speaker)

 

 

(Right front speaker)

 

 

TEST TONE LS

 

 

 

TEST TONE RS

 

 

 

(Left rear speaker)

(Right rear speaker)

Notes:

•You can adjust the speaker output levels without outputting the test tone.

•No test tone comes out of the center speaker when “CNTR SP” is set to “NONE.”

•No test tone comes out of the rear speakers when “REAR SP” is set to “NONE.”

REAR L : To adjust the left rear speaker output level (–10 to +10).

 

REAR R : To adjust the right rear speaker output level

 

(–10 to +10).

 

 

 

 

* “0” is the initial setting. If you have already changed the

 

setting, another number (level) will be shown.

 

2)

Press CONTROL UP 5/

CONTROL

DOWN UP

DOWN ∞ to adjust the selected speaker output levels.

5Adjust the speaker output levels

(–10 to +10).

Adjust the center speakers and rear speakers levels by comparing with the sound from the front speakers.

•To adjust the center speaker level, press CENTER +/–.

•To adjust the left rear speaker level, press REAR•L +/–.

•To adjust the right rear speaker level, press REAR•R +/–.

CENTER

2 3

REAR L

5 6

REARR

8 9

3)Repeat steps 1) and 2) to adjust the other speaker levels.

When you select “PL II MUSIC,” you can go to the following adjustment.

4 Turn Panorama control on or off.

Remote

1) Press ADJUST repeatedly until

NOT

 

“PANORAMA” (with the current

ADJUST

setting)* appears on the display.

 

6 Press TEST again to stop the test

TEST

tone.

1

 

On the front panel:

You can also use the buttons on the front panel to adjust the Surround modes. However, no test tone is available when using the buttons on the front panel. So, make adjustments while listening to the sound of the source played back.

*“OFF” is the initial setting. If you have

already changed the setting, “ON” will be shown.

2) Press CONTROL UP 5/DOWN ∞ CONTROL

DOWN UP

to select if you turn on or off Panorama control.

•Each time you press the button, “ON” and “OFF” change alternately.

1Set the analog or digital input mode for the

source you like to listen and start playing.

When playing back software encoded with Dolby Digital and DTS Digital Surround, select the digital input mode (see page 11).

2 Press SURROUND ON/OFF

SURROUND ON/OFF

 

repeatedly to activate Surround

 

mode.

 

Each time you press the button, Surround mode turns on and off alternately.

•If you are playing back software encoded with Dolby Digital multichannel, “DOLBY DIGITAL” is selected.

•If you are playing back software encoded with DTS Digital Surround, “DTS SURROUND” is selected.

• If you are playing back any software other

than above, you can select “PL II MUSIC” or “PL II MOVIE” according to the source

by pressing SURROUND MODE.

( PRO LOGIC II indicator lights up on the display.)

If you like to adjust sound, go to step 3.

ON : Select this when you like to enjoy “wraparound” sound effect with side-wall image.

OFF : Select this when you like to enjoy originally recorded sounds.

To cancel Surround mode

Press SURROUND ON/OFF again so that “SURROUND OFF” appears on the display.

•If Surround mode is canceled while playing back multichannel digital software, all channel signals are mixed and output through the front speakers (and subwoofer if you have connected a subwoofer and set the subwoofer setting correctly—“YES”).

22

Page 24 Page 26
Image 25
Page 24 Page 26
Contents RX-6020VBK Recepteur DE Control AUDIO/VIDEO Mises en garde, précautions et indications diverses Table of Contents Parts Identification Remote ControlFront Panel Checking the Supplied Accessories Before Installation Putting Batteries in the Remote ControlGetting Started Replace the coverAM loop antenna connection Connecting the FM and AM AntennasFM antenna connection Supplied FM Standard typeConnecting the front, center and rear speakers Connecting the SpeakersSpeaker layout diagram Connecting the subwoofer speakerTurn off all components before connecting Connecting Audio/Video ComponentsAnalog connections Audio component connections Video component connectionsFor enjoying DVD Multi Playback Mode Connecting the Power CordPlug the power cord into an AC outlet Digital connectionsTo turn off the power into standby mode Turning On the PowerBasic Operations Selecting the Source to PlayFrom the remote control Adjusting the VolumeChanging the source name On the front panelWith the Sleep Timer Turning Off the PowerTurning Off the Sounds Temporarily-MutingSelecting the Analog or Digital Input Mode Basic SettingsOn the front panel From the remote control Setting the Speaker Information RemotePress ANALOG/DIGITAL To register whether you have Connected a subwoofer or notPress Control UP /DOWN Unit with the current setting Appears on the displaySelect the unit To select the appropriate speaker DistanceComp Dynamic range Press Setting repeatedly until LFEDisplay Select the low frequency effect attenuator levelAdjusting the Subwoofer Output Level Sound AdjustmentsUsing Preset Tuning Tuning in StationsTuner Operations Selecting the FM Reception Mode Dolby Surround Creating Realistic Sound FieldsDTS Digital Surround Typical Multichannel 5.1 ch reproductionDAP Digital Acoustic Processor modes DVD Multi Playback ModeCreating sound field All Channel StereoTurning on or off Surround modes About Relations between Speaker Layout and Surround ModesSelecting Surround modes If you like to adjust sound, go to step Activate Surround modePress Surround ON/OFF to Rearl + Rearr +Repeatedly to activate Surround Mode Adjust the speaker output levels 10 to +10Press Control UP Panorama with the currentUsing DAP Modes and All Channel Stereo Activating DVD Multi Playback Mode Using DVD Multi Playback ModeAdjust the speaker output levels Press DVD MultiPress the play 3 button on the CD player Compu Link Remote Control SystemSynchronized Recording Automatic Source SelectionConnections AV Compu Link Remote Control SystemAutomatic Power On/Off Automatic Selection of TV’s Input ModeOne-Touch Video Play One Touch DVD PlayOperating Audio Components Operating JVC’s Audio/Video ComponentsCassette deck Operating Video ComponentsDVD player Problem Possible Cause Solution TroubleshootingPer channel, min. RMS, driven into 8 Ω SpecificationsHz to 20 kHz with no more than 0.8% total Harmonic distortionAM tuner FM tuner IHFGeneral EN, FR 0102NHMMDWJEIN Mises en garde, précautions et indications diverses Table of Contents FM/AM Tuning 5/ ∞ up/down buttons Identification / Getting Started Rear Right Started Components Getting Started Selecting SourceButtons Basic Operations Sound through all speakers or headphones Connected Digital in Terminals Setting the Digital InputSPK Digital Auto Basic Settings Press Setting repeatedly until LFE Or Treble with the current setting Appears on the display Sound AdjustmentsMEMORYFM/AM Tuner Operations Speaker Subwoofer speaker Left rear Possible / × Impossible Creating Realistic Sound FieldsCreating Realistic Sound Fields Receiver Test Center Press Sound Using DAP Modes and All Channel Stereo Refer to the manual supplied with the DVD player Control System Using DVD Multi PlaybackAV Compu Link Remote Control System AV Compu Link Remote Select the number of a disc installed in a CD Changer Video Components Speaker signal cables are not connected Trouble Shooting / Specifications Specifications Toll Free 1 800 Do not service the television yourselfLimited Warranty 1201NHMMDWJEIN

RX-6020VBK specifications

The JVC RX-6020VBK is a versatile and robust audio/video receiver that caters to both audiophiles and casual listeners. Renowned for its dynamic performance and reliability, the RX-6020VBK is an exemplary model within JVC's lineup, blending modern technology with user-friendly features.

At the heart of the RX-6020VBK is its exceptional audio processing capabilities, which deliver a rich and immersive sound experience. It operates with a powerful amplifier that boasts a total output of 100 watts per channel. This capability allows it to drive a wide range of speakers with ease, providing clear and distortion-free audio even at higher volumes.

One of the standout features of this receiver is its support for multiple audio and video formats. The RX-6020VBK can handle various surround sound formats, including Dolby Digital and DTS, ensuring that users enjoy a cinematic experience right at home. The unit features advanced digital signal processing, providing precise control over sound characteristics and allowing users to tailor their listening experience to their preferences.

Equipped with substantial connectivity options, the RX-6020VBK integrates seamlessly into any home entertainment system. It offers multiple HDMI inputs, composite and component video connections, as well as coaxial and optical digital audio inputs. This array of options makes it easy to connect a wide range of devices, from gaming consoles to Blu-ray players. The receiver also includes an AM/FM tuner, allowing users to enjoy their favorite radio stations.

Further enhancing its usability, the JVC RX-6020VBK features an intuitive on-screen display that simplifies navigation of the receiver's extensive settings and adjustments. The remote control is ergonomically designed, providing easy access to essential functions without overwhelming the user.

In terms of build quality, the RX-6020VBK is sturdily constructed, ensuring longevity and durability. Its sleek black exterior fits well with most home décor styles, making it an aesthetically pleasing addition to any setup.

Overall, the JVC RX-6020VBK is a well-rounded audio/video receiver that combines powerful performance, versatile connectivity, and user-friendly features, making it an excellent choice for anyone looking to enhance their home entertainment experience. Whether for music listening or movie watching, this receiver stands out as a reliable choice in today's market.
Top Page Image Contents