JVC RX-6020VBK manual Select the number of a disc installed in a CD Changer

Page 65

Operating JVC’s Audio/Video Components

You can use the remote control to operate other JVC’s components.

Operating Audio Components

IMPORTANT:

To operate JVC’s audio components using this remote control:

•You need to connect JVC’s audio components through the COMPU LINK (SYNCHRO) jacks (see page 25) in addition to the connections using cables with RCA pin plugs (see page 6).

•Aim the remote control directly at the remote sensor on the receiver.

•If you use the buttons on the front panel, the remote control will not operate that source. To operate a source with the remote control, the source must be selected with source selecting buttons on the remote control.

•To operate the cassette deck or CD recorder by COMPU LINK remote control system, set the source name correctly. (See page 8.)

•Refer also to the manuals supplied with your audio components.

Sound Adjustment

You can always use following buttons for sound adjustment:

SURROUND ON/OFF : Turn on or off Surround modes.

SURROUND MODE : Select Surround modes.

After pressing SOUND, you can use following buttons for sound adjustment:

SUBWOOFER +/–

: Adjust the subwoofer output level.

CENTER +/–

: Adjust the center speaker output level.

 

 

REAR•L +/–

: Adjust the left rear speaker output level.

REAR•R +/–

: Adjust the right rear speaker output level.

 

 

EFFECT

: Select the DAP effect level.

TEST

: Turn on or off the test tone output.

 

 

Note:

After adjusting sounds, press the corresponding source selecting button or CD-DISC to operate your target source with 10 keys on the remote control, otherwise 10 keys cannot be used for operating your target source.

Tuner

You can always use following buttons:

FM/AM

: Alternate between FM and AM.

FM MODE

: Change the FM reception mode.

 

 

After pressing FM/AM, you can use following buttons for Tuner operations:

1 – 10, +10: Select a preset channel number directly.

• For channel number 5, press 5.

• For channel number 15, press +10, then 5.

• For channel number 20, press +10, then 10.

CD player

After pressing CD, you can use following buttons for CD operations:

3

: Start playback.

 

4

: Return to the beginning of the current

 

 

(or previous) track.

 

 

 

 

¢

: Skip to the beginning of the next track.

 

7

: Stop playback.

 

 

 

 

8

: Pause playback. To release it, press 3.

 

1 – 10, +10

: Select a track number directly.

 

 

• For track number 5, press 5.

 

 

• For track number 15, press +10, then 5.

 

 

• For track number 20, press +10, then 10.

 

 

 

 

CD changer

After pressing CD-DISC, you can use following buttons for CD changer operations:

3

: Start playback.

 

4

: Return to the beginning of the current

 

 

(or previous) track.

 

 

 

 

¢

: Skip to the beginning of the next track.

 

7

: Stop playback.

 

 

 

 

8

: Pause playback. To release it, press 3.

 

1 – 6, 7/P

: Select the number of a disc installed in a CD

 

 

changer.

 

 

 

 

If your CD changer is of 200-disc loading capability (except for XL-MC100 and XL-MC301),

you can do following operations with number buttons after pressing CD:

1Select a disc number.

2Then select a track number (always enter two digits).

3Start playback.

Examples:

•Selecting disc number 3, track number 2, and start playback. Press 3, then, 0, 2, then 3.

•Selecting disc number 10, track number 5, and start playback. Press 1, 0, then, 0, 5, then 3.

•Selecting disc number 105, track number 12, and start playback. Press 1, 0, 5, then 1, 2, then 3.

CD recorder

Before starting operations described below, make sure that you have changed the source name correctly. See page 8.

After pressing TAPE/CDR, you can use following buttons for CD recorder operations:

3

: Start playback.

 

4

: Return to the beginning of the current

 

 

(or previous) track.

 

 

 

 

¢

: Skip to the beginning of the next track.

 

7

: Stop playback or recording.

 

 

 

 

8

: Pause playback. To release it, press 3.

 

REC PAUSE

: Press this button to enter recording pause.

 

Press this button and then 3 to start recording.

28

Page 64 Page 66
Image 65
Page 64 Page 66
Contents RX-6020VBK Recepteur DE Control AUDIO/VIDEO Mises en garde, précautions et indications diverses Table of Contents Front Panel Remote ControlParts Identification Checking the Supplied Accessories Before Installation Putting Batteries in the Remote ControlGetting Started Replace the coverAM loop antenna connection Connecting the FM and AM AntennasFM antenna connection Supplied FM Standard typeConnecting the front, center and rear speakers Connecting the SpeakersSpeaker layout diagram Connecting the subwoofer speakerTurn off all components before connecting Connecting Audio/Video ComponentsAnalog connections Audio component connections Video component connectionsFor enjoying DVD Multi Playback Mode Connecting the Power CordPlug the power cord into an AC outlet Digital connectionsTo turn off the power into standby mode Turning On the PowerBasic Operations Selecting the Source to PlayFrom the remote control Adjusting the VolumeChanging the source name On the front panelWith the Sleep Timer Turning Off the PowerTurning Off the Sounds Temporarily-MutingSelecting the Analog or Digital Input Mode Basic SettingsOn the front panel From the remote control Setting the Speaker Information RemotePress ANALOG/DIGITAL To register whether you have Connected a subwoofer or notPress Control UP /DOWN Unit with the current setting Appears on the displaySelect the unit To select the appropriate speaker DistanceComp Dynamic range Press Setting repeatedly until LFEDisplay Select the low frequency effect attenuator levelAdjusting the Subwoofer Output Level Sound AdjustmentsTuner Operations Tuning in StationsUsing Preset Tuning Selecting the FM Reception Mode Dolby Surround Creating Realistic Sound FieldsDTS Digital Surround Typical Multichannel 5.1 ch reproductionDAP Digital Acoustic Processor modes DVD Multi Playback ModeCreating sound field All Channel StereoSelecting Surround modes About Relations between Speaker Layout and Surround ModesTurning on or off Surround modes If you like to adjust sound, go to step Activate Surround modePress Surround ON/OFF to Rearl + Rearr +Repeatedly to activate Surround Mode Adjust the speaker output levels 10 to +10Press Control UP Panorama with the currentUsing DAP Modes and All Channel Stereo Activating DVD Multi Playback Mode Using DVD Multi Playback ModeAdjust the speaker output levels Press DVD MultiPress the play 3 button on the CD player Compu Link Remote Control SystemSynchronized Recording Automatic Source SelectionConnections AV Compu Link Remote Control SystemAutomatic Power On/Off Automatic Selection of TV’s Input ModeOne-Touch Video Play One Touch DVD PlayOperating Audio Components Operating JVC’s Audio/Video ComponentsDVD player Operating Video ComponentsCassette deck Problem Possible Cause Solution TroubleshootingPer channel, min. RMS, driven into 8 Ω SpecificationsHz to 20 kHz with no more than 0.8% total Harmonic distortionGeneral FM tuner IHFAM tuner EN, FR 0102NHMMDWJEIN Mises en garde, précautions et indications diverses Table of Contents FM/AM Tuning 5/ ∞ up/down buttons Identification / Getting Started Rear Right Started Components Getting Started Buttons SourceSelecting Basic Operations Sound through all speakers or headphones Connected Digital in Terminals Setting the Digital InputSPK Digital Auto Basic Settings Press Setting repeatedly until LFE Or Treble with the current setting Appears on the display Sound AdjustmentsMEMORYFM/AM Tuner Operations Speaker Subwoofer speaker Left rear Possible / × Impossible Creating Realistic Sound FieldsCreating Realistic Sound Fields Receiver Test Center Press Sound Using DAP Modes and All Channel Stereo Refer to the manual supplied with the DVD player Control System Using DVD Multi PlaybackAV Compu Link Remote Control System AV Compu Link Remote Select the number of a disc installed in a CD Changer Video Components Speaker signal cables are not connected Trouble Shooting / Specifications Specifications Toll Free 1 800 Do not service the television yourselfLimited Warranty 1201NHMMDWJEIN

RX-6020VBK specifications

The JVC RX-6020VBK is a versatile and robust audio/video receiver that caters to both audiophiles and casual listeners. Renowned for its dynamic performance and reliability, the RX-6020VBK is an exemplary model within JVC's lineup, blending modern technology with user-friendly features.

At the heart of the RX-6020VBK is its exceptional audio processing capabilities, which deliver a rich and immersive sound experience. It operates with a powerful amplifier that boasts a total output of 100 watts per channel. This capability allows it to drive a wide range of speakers with ease, providing clear and distortion-free audio even at higher volumes.

One of the standout features of this receiver is its support for multiple audio and video formats. The RX-6020VBK can handle various surround sound formats, including Dolby Digital and DTS, ensuring that users enjoy a cinematic experience right at home. The unit features advanced digital signal processing, providing precise control over sound characteristics and allowing users to tailor their listening experience to their preferences.

Equipped with substantial connectivity options, the RX-6020VBK integrates seamlessly into any home entertainment system. It offers multiple HDMI inputs, composite and component video connections, as well as coaxial and optical digital audio inputs. This array of options makes it easy to connect a wide range of devices, from gaming consoles to Blu-ray players. The receiver also includes an AM/FM tuner, allowing users to enjoy their favorite radio stations.

Further enhancing its usability, the JVC RX-6020VBK features an intuitive on-screen display that simplifies navigation of the receiver's extensive settings and adjustments. The remote control is ergonomically designed, providing easy access to essential functions without overwhelming the user.

In terms of build quality, the RX-6020VBK is sturdily constructed, ensuring longevity and durability. Its sleek black exterior fits well with most home décor styles, making it an aesthetically pleasing addition to any setup.

Overall, the JVC RX-6020VBK is a well-rounded audio/video receiver that combines powerful performance, versatile connectivity, and user-friendly features, making it an excellent choice for anyone looking to enhance their home entertainment experience. Whether for music listening or movie watching, this receiver stands out as a reliable choice in today's market.
Top Page Image Contents