JVC RX-6020VBK manual Specifications

Page 69

Specifications

FM tuner (IHF)

Tuning Range:

87.5 MHz to 108.0 MHz

Usable Sensitivity:

Monaural:

12.8 dBf (1.2 µV/75 Ω)

50 dB Quieting Sensitivity:

Monaural:

21.3 dBf (3.2 µV/75 Ω)

 

Stereo:

41.3 dBf (31.5 µV/75 Ω)

Signal-to-Noise Ratio (IHF-A weighted):

Monaural:

78 dB at 85 dBf

 

Stereo:

73 dB at 85 dBf

Total Harmonic Distortion:

Monaural:

0.4% at 1 kHz

 

Stereo:

0.6% at 1 kHz

Stereo Separation at REC OUT:

35 dB at 1 kHz

 

Alternate Channel Selectivity:

45 dB: (±400 kHz)

 

Frequency Response:

30 Hz to 15 kHz: (+0.5 dB, –3 dB)

AM tuner

Tuning Range:

530 kHz to 1 710 kHz

 

Usable Sensitivity:

Loop antenna

400 µV/m

Signal-to-Noise Ratio:

50 dB (100 mV/m)

 

General

Power Requirements:

AC 120V , 60 Hz

Power Consumption:

180 W/230 VA (at operation)

 

2 W (in standby mode)

Dimensions (W x H x D):

435 mm x 146.5 mm x 416 mm

 

(17 3/16 in. x 5 13/16 in. x 16 7/16 in.)

Mass:

8.8 kg (19.5 lbs)

32

Page 68 Page 70
Image 69
Page 68 Page 70
Contents RX-6020VBK Recepteur DE Control AUDIO/VIDEO Mises en garde, précautions et indications diverses Table of Contents Remote Control Parts IdentificationFront Panel Checking the Supplied Accessories Before Installation Putting Batteries in the Remote ControlGetting Started Replace the coverAM loop antenna connection Connecting the FM and AM AntennasFM antenna connection Supplied FM Standard typeConnecting the front, center and rear speakers Connecting the SpeakersSpeaker layout diagram Connecting the subwoofer speakerTurn off all components before connecting Connecting Audio/Video ComponentsAnalog connections Audio component connections Video component connectionsFor enjoying DVD Multi Playback Mode Connecting the Power CordPlug the power cord into an AC outlet Digital connectionsTo turn off the power into standby mode Turning On the PowerBasic Operations Selecting the Source to PlayFrom the remote control Adjusting the VolumeChanging the source name On the front panelWith the Sleep Timer Turning Off the PowerTurning Off the Sounds Temporarily-MutingSelecting the Analog or Digital Input Mode Basic SettingsOn the front panel From the remote control Setting the Speaker Information RemotePress ANALOG/DIGITAL To register whether you have Connected a subwoofer or notPress Control UP /DOWN Unit with the current setting Appears on the displaySelect the unit To select the appropriate speaker DistanceComp Dynamic range Press Setting repeatedly until LFEDisplay Select the low frequency effect attenuator levelAdjusting the Subwoofer Output Level Sound AdjustmentsTuning in Stations Using Preset TuningTuner Operations Selecting the FM Reception Mode Dolby Surround Creating Realistic Sound FieldsDTS Digital Surround Typical Multichannel 5.1 ch reproductionDAP Digital Acoustic Processor modes DVD Multi Playback ModeCreating sound field All Channel StereoAbout Relations between Speaker Layout and Surround Modes Turning on or off Surround modesSelecting Surround modes If you like to adjust sound, go to step Activate Surround modePress Surround ON/OFF to Rearl + Rearr +Repeatedly to activate Surround Mode Adjust the speaker output levels 10 to +10Press Control UP Panorama with the currentUsing DAP Modes and All Channel Stereo Activating DVD Multi Playback Mode Using DVD Multi Playback ModeAdjust the speaker output levels Press DVD MultiPress the play 3 button on the CD player Compu Link Remote Control SystemSynchronized Recording Automatic Source SelectionConnections AV Compu Link Remote Control SystemAutomatic Power On/Off Automatic Selection of TV’s Input ModeOne-Touch Video Play One Touch DVD PlayOperating Audio Components Operating JVC’s Audio/Video ComponentsOperating Video Components Cassette deckDVD player Problem Possible Cause Solution TroubleshootingPer channel, min. RMS, driven into 8 Ω SpecificationsHz to 20 kHz with no more than 0.8% total Harmonic distortionFM tuner IHF AM tunerGeneral EN, FR 0102NHMMDWJEIN Mises en garde, précautions et indications diverses Table of Contents FM/AM Tuning 5/ ∞ up/down buttons Identification / Getting Started Rear Right Started Components Getting Started Source SelectingButtons Basic Operations Sound through all speakers or headphones Connected Digital in Terminals Setting the Digital InputSPK Digital Auto Basic Settings Press Setting repeatedly until LFE Or Treble with the current setting Appears on the display Sound AdjustmentsMEMORYFM/AM Tuner Operations Speaker Subwoofer speaker Left rear Possible / × Impossible Creating Realistic Sound FieldsCreating Realistic Sound Fields Receiver Test Center Press Sound Using DAP Modes and All Channel Stereo Refer to the manual supplied with the DVD player Control System Using DVD Multi PlaybackAV Compu Link Remote Control System AV Compu Link Remote Select the number of a disc installed in a CD Changer Video Components Speaker signal cables are not connected Trouble Shooting / Specifications Specifications Toll Free 1 800 Do not service the television yourselfLimited Warranty 1201NHMMDWJEIN

RX-6020VBK specifications

The JVC RX-6020VBK is a versatile and robust audio/video receiver that caters to both audiophiles and casual listeners. Renowned for its dynamic performance and reliability, the RX-6020VBK is an exemplary model within JVC's lineup, blending modern technology with user-friendly features.

At the heart of the RX-6020VBK is its exceptional audio processing capabilities, which deliver a rich and immersive sound experience. It operates with a powerful amplifier that boasts a total output of 100 watts per channel. This capability allows it to drive a wide range of speakers with ease, providing clear and distortion-free audio even at higher volumes.

One of the standout features of this receiver is its support for multiple audio and video formats. The RX-6020VBK can handle various surround sound formats, including Dolby Digital and DTS, ensuring that users enjoy a cinematic experience right at home. The unit features advanced digital signal processing, providing precise control over sound characteristics and allowing users to tailor their listening experience to their preferences.

Equipped with substantial connectivity options, the RX-6020VBK integrates seamlessly into any home entertainment system. It offers multiple HDMI inputs, composite and component video connections, as well as coaxial and optical digital audio inputs. This array of options makes it easy to connect a wide range of devices, from gaming consoles to Blu-ray players. The receiver also includes an AM/FM tuner, allowing users to enjoy their favorite radio stations.

Further enhancing its usability, the JVC RX-6020VBK features an intuitive on-screen display that simplifies navigation of the receiver's extensive settings and adjustments. The remote control is ergonomically designed, providing easy access to essential functions without overwhelming the user.

In terms of build quality, the RX-6020VBK is sturdily constructed, ensuring longevity and durability. Its sleek black exterior fits well with most home décor styles, making it an aesthetically pleasing addition to any setup.

Overall, the JVC RX-6020VBK is a well-rounded audio/video receiver that combines powerful performance, versatile connectivity, and user-friendly features, making it an excellent choice for anyone looking to enhance their home entertainment experience. Whether for music listening or movie watching, this receiver stands out as a reliable choice in today's market.
Top Page Image Contents