ProForm PFTL79008.0 manual Raise the Frame 48 to the position shown

Page 13

17.Raise the Frame (48) to the position shown.

Have a second person hold the Frame until this step is completed.

Orient the Storage Latch (45) so that the large barrel and the Latch Knob (46) are in the posi- tions shown.

Attach the upper end of the Storage Latch (45) to the bracket on the Frame (48) with a 3/8" x 2" Bolt (9) and a 3/8" Nut (10).

Attach the lower end of the Storage Latch (45) to the Base (96) with a 3/8" x 1 3/4" Bolt (7). Note: It may be necessary to move the Frame (48) back and forth to align the Storage Latch with the Base.

Lower the Frame (48) (see HOW TO LOWER THE TREADMILL FOR USE on page 21).

17		48
	10	48
	10	9
		9
		45
		46
		Large
		Barrel96
		7

18.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread- mill. Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages 23 and 24).

13

Image 13

Contents Model No. PFTL79008.0 Serial No QUESTIONS?Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT On the WEBTable of Contents Local electronics store Important PrecautionsPulse sensors are not medical devices Page Before YOU Begin Assembly Do not fully fold the Frame yet Make sure that the power cord is unpluggedTighten the Nut the Wheel must turn freely Right Upright do not fully tighten the Bolts Yet With a second Bolt Spacer 95, 3/8 x 4 Bolt 3/8 Star WasherNot fully fold the Frame yet Bolts yet Not Connected PROPERLY, the CON Sole MAY be Damaged When Uprights 77, 92. Be careful not to pinch any WiresScrews before firmly tightening any of them Same wayAttach the other Crosswalk Arm 82 Does not come apart. Note See the lowerRaise the Frame 48 to the position shown HOW to PUT on the Chest Pulse Sensor HOW to USE the Chest Pulse SensorChest Pulse Sensor Care and Maintenance HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerSelect the manual mode. When you Insert the key into the consoleMeasure your heart rate if desired Follow your progress with the displays. WhenTurn on the fan if desired Select a preset workout HOW to USE a Preset WorkoutHOW to USE the Crosswalk Arms Information ModeHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USEProblem The power turns off during use TroubleshootingCompatible with GFCI-equipped outlets Top Problem The walking belt slows when walked onTurn if the walking belt has shifted to the right Problem The crosswalk arms squeak during useExercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencyKey No. Qty Description Part LIST-Model No. PFTL79008.0Qty Exploded Drawing A-Model No. PFTL79008.0 R0109A Exploded Drawing B-Model No. PFTL79008.0 R0109A 10195 102 103 111 Exploded Drawing D-Model No. PFTL79008.0 R0109A Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT