10.Set the console assembly face down on a soft surface to avoid scratching the console assem- bly. Remove the two Screws (A). Next, lift off the Crossbar (107). Discard the two Screws.
11.IMPORTANT: To avoid damaging the Crossbar (107), do not use power tools and do not overtighten the #10 x 3/4" Screws (4) or the #10 x 3/4" Flat Head Screws (109). Orient the Crossbar (107) as shown. Attach the Crossbar to the Handrails (84, 85) with two #10 x 3/4" Flat Head Screws (109), two #10 x 3/4" Screws (4), and two #10 Star Washers (12) as shown. Start all four Screws, and then tighten each of them.
10 |
|
|
| Console |
|
|
|
| |
|
|
|
| Assembly |
|
| A |
|
|
|
| 107 |
|
|
11 | 109 | 4 12 |
|
|
| 84 | 107 | 109 | 4 |
|
|
| ||
|
|
|
| 12 |
|
|
| 85 |
|
11