ProForm PFTL70010.0 warranty See the inset drawing. Tie the wire tie

3.	Identify the Right Upright (81), which is marked	3
	with a “Right” sticker. Hold the Right Upright
	near the Base (91) as shown.			81
	See the inset drawing. Tie the wire tie in the
	Right Upright (81) securely around the end of
	the Upright Wire (88). Then, pull the other end	88	Wire Tie		88
	of the wire tie until the Upright Wire is routed
	completely through the Right Upright.				91
			81
		88	Wire
			Tie
4. Hold the Right Upright (81) against the Base		4			7
	(91). Be careful not to pinch the Upright Wire
	(88). Insert two 3/8" x 4" Bolts (7) and a 3/8" x		81	8
	1 1/2" Bolt (8) with three 3/8" Star Washers (11)
	into the Right Upright.			11	11
	Partially tighten the 3/8" x 4" Bolts (7) until the
	heads of the Bolts touch the Right Upright (81);				88
	do not fully tighten the Bolts yet. Partially
	tighten the 3/8" x 1 1/2" Bolt (8).				91
		8