11.If necessary, press the Left Tray (94) and the Right Tray (103) into the Console Back (98). See step 8. Firmly tighten the two 1/4" x 1 1/4" Bolts (10).
12.Raise the Frame (51) to the position shown.
Have a second person hold the Frame until this step is completed.
Orient the Storage Latch (48) so that the large barrel and the Latch Knob (49) are oriented as shown.
Attach the upper end of the Storage Latch (48) to the bracket on the Frame (51) with a 3/8" x 2" Bolt (7) and a 3/8" Nut (11).
Attach the lower end of the Storage Latch (48) to the Base (87) with a 3/8" x 1 3/4" Bolt (8). Note: It may be necessary to move the Frame (51) back and forth to align the Storage Latch with the Base.
Lower the Frame (51) (see HOW TO LOWER THE TREADMILL FOR USE on page 21).
11 | 103 |
94 | |
98 |
|
12 |
|
| 51 |
7 | 11 |
| 48 |
| 49 |
| Large |
| Barrel |
| 87 |
| 8 |
13.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread- mill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 23 and 24).
12