1. Make sure that the power cord is unplugged. | 1 |
| B | A |
|
With the help of a second person, carefully tip |
|
| |||
the treadmill onto its left side. Partially fold the |
|
|
|
|
|
Frame (51) so that the treadmill is more stable; |
|
| Hole | 87 |
|
do not fully fold the Frame yet. |
|
|
| ||
Remove and discard the indicated bolts (A) and |
|
| 7 | 84 |
|
the shipping bracket (B). |
|
|
| 4 | |
Cut the shipping tie securing the Upright Wire |
|
|
|
|
|
(79) to the Base (87). Locate the plastic tie in |
|
|
|
|
|
the indicated hole in the Base, and use the tie to |
|
|
|
|
|
pull the Upright Wire out of the hole. | 51 | 89 84 4 |
|
| |
Attach two Base Feet (84) to the Base (87) in the |
|
| |||
locations shown with two Base Foot Spacers |
|
|
|
|
|
(89) and two #8 x 1" Tek Screws (4). |
|
|
| 84 |
|
Then, attach the other two Base Feet (84) with |
|
|
| 4 | |
two #8 x 1" Tek Screws (4). |
|
|
|
| |
|
| 89 | 84 |
|
|
|
|
|
|
| |
2. Attach a Wheel (88) to the Base (87) with a 3/8" | 2 |
|
|
|
|
x 2" Bolt (7) and a 3/8" Nut (11). Do not over- |
|
| 83 | ||
tighten the Nut; the Wheel must turn freely. |
|
|
| ||
Press a Base Cap (83) into the Base (87). |
|
|
|
|
|
| 7 |
|
|
|
|
|
| 88 | 87 |
|
|
|
| 11 |
|
|
|
| 7 |
|
|
|
|