5.With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (51) so that the treadmill is more stable; do not fully fold the Frame yet.
Remove and discard the indicated bolts (A) and the shipping bracket (B).
Attach a Wheel (88) to the Base (87) with a 3/8" x 2" Bolt (7) and a 3/8" Nut (11). Do not over- tighten the Nut; the Wheel must turn freely.
6.Press a Base Cap (83) into the Base (87). Hold a Bolt Spacer (81) inside the lower end of the Left Upright (75). Insert a 3/8" x 4" Bolt (9) with a 3/8" Star Washer (12) into the Left Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (81), 3/8" x 4" Bolt (9), and 3/8" Star Washer (12).
Hold the Left Upright Spacer (86) and the Left Upright (75) against the Base (87). Tighten the 3/8" x 4" Bolts (9) until the heads of the Bolts touch the Upright; do not fully tighten the
Bolts yet.
With the help of a second person, tip the tread- mill so that the Base (87) is flat on the floor.
5 |
|
| B |
|
|
A |
|
|
|
|
|
|
|
|
| 7 | 51 |
|
|
|
|
| |
|
|
| 87 | 88 |
|
|
|
|
| 11 |
|
6 | 9 |
|
|
|
|
|
| 75 |
| ||
| 12 |
| |||
| 86 |
|
| ||
| 81 |
|
|
| |
|
|
|
|
| |
83 | 81 | 87 |
|
|
|
9