THE INFORMATION MODE
The console features a userʼs mode that allows you to choose an audio setting for your iFit workouts. The userʼs mode also keeps track of the total number of miles that the walking belt has moved and the total number of hours that the treadmill has been operated. You can also select miles or kilometers as the unit of measurement and turn on and turn off the demo mode. To select the information mode, hold down the Stop button while inserting the key into the console and then release the Stop button. When the information mode is selected, the following information will be shown:
You can select an audio setting for your personal trainer if desired. When you use an iFit card, a per- sonal trainer will guide you through your workouts. If you select the ON setting, the personal trainer will give you detailed instructions. If you select the OFF setting, your personal trainer will simply guide you through your iFit workouts. To change the audio setting, press the Incline decrease button.
The display will show the total number of hours the treadmill has been used. The display will also show the total number of miles (or kilometers) that the walking belt has moved.
The word ENGLISH for miles or METRIC for kilome- ters will appear in the display. Press the Speed in- crease button to change the unit of measurement if de- sired.
Note: The console features a display demo mode, de- signed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, switch the reset/off circuit breaker to the reset position,
and insert the key into the console. However, when you remove the key, the displays will remain lit, al- though the buttons will not function. If the demo mode is turned on, the word ON will appear in the display while the information mode is selected. To turn on or off the demo mode, press the Speed decrease button. To exit the information mode, remove the key from the console.
HOW TO USE THE STEREO SOUND SYSTEM
This treadmill has been designed specifically to work with iPod and has been certified by the developer to meet Apple performance standards. To play music or audio books through the consoleʼs stereo speakers, you must connect your iPod, MP3 player, CD player, or other personal audio player to the console through the audio jack or through the compatible music port for iPod. The music port will charge your iPod while you use it.
To use the audio wire, locate the audio wire and plug it into the audio jack near the speakers. Then plug the audio wire into a jack on your MP3 player, CD player, or other personal audio player. Make sure that the audio wire is fully plugged in.
To use the compatible music port for iPod, you need an iFit universal iPod connector (not included). To pur- chase an iFit universal iPod connector, please call the telephone number on the front cover of this manual. Plug one end into the music port near the speakers and the other end into your iPod. Make sure that the iFit universal iPod connector is fully plugged in.
Next, press the Play button on your iPod, MP3 player, CD player, or other personal audio player. Adjust the volume on your personal audio player or press the Volume increase and decrease buttons on the con- sole.
If you are using a personal CD player and the CD skips, set the CD player on the floor or another flat sur- face and not on the console.
19