ProForm 831.24624.0 user manual Assembly, Make sure that the power cord is unplugged

Page 6

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor- mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys

and your own phillips screwdriver

, rubber

mallet

, and adjustable wrench

.

 

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 23. The number after the parentheses shows the quan- tity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preattached to one of the parts to be assembled. If a part is missing, call toll-free1-888-533-1333. To avoid damaging plastic parts, do not use power tools for assembly.

1” Tek Screw (39)–4

3/4” Screw (2)–12

Silver Ground

Handrail

 

 

 

 

 

 

 

 

 

 

 

Screw (96)–1

Bolt (37)–2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Extension Leg

 

Wheel Bolt (64)–2

Nut (46)–2

Wheel Nut (32)–2

 

 

2 1/4” Bolt (93)–2

5/16” Star

1/4” Star

 

 

 

Washer (101)–4

Washer (95)–2

 

 

 

 

 

2 3/4” Bolt (100)–2

1. Make sure that the power cord is unplugged.

1

 

 

 

 

 

 

With the help of a second person, carefully tip

69

 

 

the treadmill onto its left side as shown. Partially

 

 

fold the Frame (86) so the treadmill is more sta-

 

 

 

ble. Do not fully fold the Frame until the

 

 

 

treadmill is completely assembled.

93

 

 

Insert an Extension Leg (63) into the base of the

101

 

 

 

 

 

right Upright (69). Hold an Extension Leg Nut

 

 

101

(46) in the bottom of the Extension Leg, and

 

 

 

 

 

thread a 2 1/4" Bolt (93) with a 5/16" Star

 

 

 

Washer (101) into the top of the Extension Leg.

63

46

100

Next, thread a 2 3/4" Bolt (100) with a 5/16" Star

 

 

 

 

 

 

Washer into the bottom of the Extension leg.

86

 

 

Firmly tighten the Bolts.

 

 

 

 

 

 

 

 

 

6

 

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Treadmill Exerciser Model No Serial NoTable of Contents Important Precautions Page Before YOU Begin Right SideBack Assembly Make sure that the power cord is unpluggedFirmly tighten the Bolts Nut 32 as shown. Do not overtighten Frame 86 until the treadmill is com Pletely assembledLeg. Firmly tighten the Bolts Not shown in the same way Make sure that the console wire is notOther Handrail Bracket to the left Upright Are not Connected PROPERLY,Handrail Bolts yet BoltsOperation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeMeasure your heart rate if desired Turn on the fan if desiredWhenkey. you are finished exercising, remove HOW to USE a Calorie Goal Program Select a calorie goal programHOW to USE a Distance Goal Program Select a distance goal programPress the Start button to start the program HOW to USE a Speed Program Select one of the speed programsInformation MODE/DEMO Mode HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useTop Problem The walking belt slows when walked on Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencyKey Qty Description If a part is missing, call toll-freeExploded R0806A Exploded Drawing C-Model No Exploded Drawing D-Model No DAY Full Warranty Sears, Roebuck and Co., Hoffman Estates, IL
Top Page Image Contents