HOW TO USE A CALORIE PROGRAM
1 Insert the key into the console.
See HOW TO TURN ON THE POWER on page 11.
2 Enter your weight.
See step 2 on page 11. Note: Always enter your weight before using a calorie program; the speed and incline settings of the program will depend on the weight setting that you enter.
3 Select a calorie program.
To select
one of the eight calorie programs, press the left Select button re- peatedly.
When a
calorie program is selected, the display will show the calorie goal (the approximate number of calo- ries to be burned during the program) and the number of minutes that the program will last. In addition, the maximum incline setting of the pro- gram and the maximum speed setting of the pro- gram will flash in the display. A few seconds after a calorie program is selected, a profile of the speed settings of the program will scroll across the display.
4 Press the Start button to start the program.
A moment after the button is pressed, the tread- mill will automatically adjust to the first speed and incline settings of the program. Hold the handrails and begin walking.
Each program is divided into 30, 40, 45, 50, 55, or 60
The speed |
|
setting for |
|
the first seg- |
|
ment will be | Current Segment |
shown in | |
the flashing |
|
Current Segment column in the display. (The in- cline settings are not shown in the display.) The speed settings for the next several segments will be shown in the columns to the right.
When only three seconds remain in the first seg- ment of the program, both the Current Segment column and the column to the right will flash and a series of tones will sound. If the speed and/or in- cline of the treadmill is about to change, the speed setting and/or the incline setting will flash in the display to alert you.
When the first segment is completed, all speed settings will move one column to the left. The speed setting for the second segment will then be shown in the flashing Current Segment column and the treadmill will automatically adjust to the speed and incline settings for the second seg- ment. Note: If all the indicators in the Current Segment column are lit, the speed settings may move downward so that only the highest indicators appear in the display.
If the speed or incline setting for the current seg- ment is too high or too low, you can manually override the setting by pressing the Speed and Incline buttons. Every few times a Speed button is pressed, an additional indicator will appear or dis- appear in the Current Segment column.
Important: When the current segment of the program ends, the treadmill will automatically adjust to the speed and incline settings for the next segment.
To stop the program at any time, press the Stop button. The time will begin to flash in the display. To restart the program, press the Start button or the Speed increase button. The walking belt will begin to move at 1 mph. When the next segment of the program begins, the treadmill will automati- cally adjust to the speed and incline settings for that segment.
The program will continue in this way until the last segment of the program ends. The walking belt will then slow to a stop. Important: The calorie goal is an estimate of the number of calories that you will burn during the program. The ac- tual number of calories that you burn will de- pend on your weight. In addition, if you manu- ally change the speed or incline of treadmill during the program, the number of calories you burn will be affected.
13