ProForm 831.24646.1 user manual Assembly, Make sure that the power cord is unplugged

Page 6

ASSEMBLY

Make sure that the power cord is unplugged. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal con- dition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys

and your own phillips screwdriver

.

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST on pages 22 and 23. The number after the parentheses shows the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preattached to one of the parts to be assembled. If a part is missing, call toll-free1-888-533-1333. To avoid damaging plastic parts, do not use power tools for assembly.

Screw (3)–6

Handail Bolt (64)–4

Extension Leg Nut (67)–2

 

Front Endcap

2.25" Extension Leg Bolt (92)–2

Screw (14)–2

1" Tek Screw (83)–2

2.5" Extension Leg Bolt (65)–2

1. Make sure that the power cord is unplugged.

1

 

 

 

 

 

With the help of a second person, carefully tip

 

 

14

the treadmill onto its left side as shown. Partially

84

 

fold the Frame (58) so the treadmill is more sta-

 

 

 

ble. Do not fully fold the Frame until the

 

 

44

treadmill is completely assembled.

 

 

 

Insert an Extension Leg (89) into the base of the

92

 

 

Uprights (84). Hold an Extension Leg Nut (67) in

89

 

 

the bottom of the Extension Leg, and thread a

 

 

2.25" Extension Leg Bolt (92) into the top of the

 

 

 

Extension Leg. Next, thread a 2.5" Extension Leg

 

 

 

Bolt (65) into the bottom of the Extension Leg.

 

67

65

Firmly tighten the Extension Leg Bolts.

 

 

 

Slide a Front Endcap (44) onto the base of the

58

 

 

Uprights (84). Partially tighten a Front Endcap

 

 

 

Screw (14) into the Front Endcap and the base.

 

 

 

 

6

 

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model No Serial No Sears, Roebuck and Co., Hoffman Estates, ILTable of Contents Important Precautions Page Before YOU Begin Right SideBack Assembly Make sure that the power cord is unpluggedFirmly tighten the Extension Leg Bolts Bolts but do not tighten them yet. Then, at Treadmill until it is completely assembledExtension Leg. Firmly tighten the Extension Leg Bolts See steps 1 and 3. Fully tighten the two Front Endcap Screws Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeMeasure your heart rate if desired Turn on the fan if desiredWhenkey. you are finished exercising, remove HOW to USE a Calorie Program Press the Start button to start the programHOW to USE the POUND-A-WEEK Program HOW to USE a Cross Training Program Select a cross training programPerform the first strength exercise when Prompted Continue the cross training programInformation Mode Optional Chest Pulse SensorHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useTop View Problem The walking belt slows when walked on Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencyR1106A Qty DescriptionIf a part is missing, call toll-free Model Exploded Drawing B-Model No Exploded Drawing C-Model No Exploded Drawing D-Model No DAY Full Warranty Get it fixed, at your home or ours
Top Page Image Contents