To stop the program temporarily, press the Stop button. The Time/Incline/Segment Time display
will begin to fl ash. To restart the program, press
the Start button or the Speed ▲ button. To end the program, press the Stop button, remove the key,
and then reinsert the key.
4 Follow your progress with the displays.
See step 5 on page 10.
5 Measure your heart rate, if desired.
See step 6 on page 11.
6 | When the program is completed, remove the | |
key from the console. |
| |
| make sure that | |
| When the program has ended, | |
| the incline of the treadmill is at the lowest set- | |
| ting. Next, remove the key from the console and | |
| put it in a safe place. | Note: If the displays and |
various indicators on the console remain lit after the key is removed, the console is in the “demo” mode. See page 20 and turn off the demo mode.
When you are finished using the treadmill, move the on/off circuit breaker near the power cord to the off position.
HOW TO USE HEART RATE PROGRAMS |
|
CAUTION: | If you have heart prob- |
lems, or if you are over 60 years of age and have been inactive, do not use the heart rate programs. If you are taking medication regu- larly, consult your physician to find whether the medication will affect your exercise heart rate.
Follow the steps below to use a heart rate program.
Note: You must wear the optional chest pulse sen- sor (see page 20) to use a heart rate program.
1 Put on the chest pulse sensor.
See the instructions included with the optional chest pulse sensor.
2 Insert the key fully into the console.
See HOW TO TURN ON THE POWER on page 10.
3 Select a heart rate program.
When the key is inserted, the
manual mode
will be selected. To select a heart rate pro- gram, press the
Program button repeatedly until one of the two heart rate program indicators lights.
The two profiles on the left side of the console show how the target heart rate will change during the programs. The numbers above the profiles
represent percentages of your estimated maxi-
mum heart rate . Note: Your estimated maximum heart rate is determined by subtracting your age from 220. For example, if you are 30 years old, your estimated maximum heart rate is 190 beats
per minute (220 – 30 = 190). If you are 30 years old, a target heart rate setting of 50% is equal to 95 beats per minute (50% of 190 is 95).
13