ProForm 831.297793 user manual Symptom The walking belt slows when walked on

Page 16

4.SYMPTOM: The walking belt slows when walked on

a. Use only a UL-listed surge suppressor, rated at 15 amps, with a 14-gauge cord of five feet or less in length.

b. If the walking belt is overtightened, treadmill performance may decrease and the walking belt may be permanently damaged. Remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts counterclock- wise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is prop- erly tightened.

c. If the walking belt still slows when walked on, please call our toll- free HELPLINE.

5. SYMPTOM: The walking belt is off-center

b

3ÓÐ4Ó

 

Rear Roller Adjustment Bolts

a. If the walking belt has shifted to the left, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn the left rear roller adjustment bolt clockwise, and the right bolt coun- terclockwise, 1/4 of a turn each. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is cen- tered.

b. If the walking belt has shifted to the right, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn the left rear roller adjustment bolt counterclockwise, and the right bolt clockwise, 1/4 of a turn each. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered.

6.SYMPTOM: The walking belt slips when walked on

a.If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking plat- form. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tight- ened.

a

b

a

16

Image 16
Contents Model No Serial No SEARS, Roebuck and CO., Hoffman ESTATES, ILTable of Contents Important Precautions Page Before YOU Begin Left Side Right SideAssembly Harness 48 into the Right Handrail Harness into the right UprightDo not Cut Page HOW to Plug in the Power Cord Operation and AdjustmentPerformant Lubetm Walking Belt Console Diagram Features of the ConsoleOn the face of the console, remove it Key STEP-BY-STEP Console OperationChange the speed of the walking belt as desired by DISTANCE/LAPS CALS/FAT Cals Pulse Sensor TROUBLE-SHOOTING Information Mode Whenkey. you are finished exercising, remove HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USEMaintenance and TROUBLE-SHOOTING Symptom the Power does not Turn onSymptom the Power Turns OFF During USE TopSymptom The walking belt is off-center Symptom The walking belt slows when walked onSymptom The walking belt slips when walked on Exercise Intensity Conditioning GuidelinesWorkout Guidelines Suggested Stretches Part LISTÑModel No Key Qty DescriptionExploded DRAWINGÑModel No 114 108 103 104 107 101 105 36 78 100 Model No Full 90 DAY WarrantySEARS, Roebuck and CO., Dept WA, Hoffman ESTATES, IL