7. Attach the Console Base (87) to the Left and Right | 7 |
| |
Handrails (74, 85) with four Long Screws (114). |
| ||
87 | 74 | ||
| |||
|
| ||
Refer to assembly step 6. Tighten the four Handrail | 85 |
| |
Bolts (78) used in assembly step 6. |
| ||
|
| ||
| 114 | 114 | |
|
| ||
8. Press two Small Upright Plugs (79) into the holes near | 8 |
| |
the upper ends of the Uprights (82). |
| ||
|
| ||
|
| 79 | |
|
| 82 | |
9. Remove the backing from the Adhesive Clip (99). Press | 9 |
| |
the Adhesive Clip onto the base of the right Upright (82) |
| ||
as shown. Press the Allen Wrench (100) into the |
|
| |
Adhesive Clip. |
|
| |
|
| 82 | |
|
| 100 | |
|
| 99 |
10.Make sure that all parts are tightened before you use the treadmill. To protect the floor or carpet, place a mat under the treadmill.
8