ProForm 831.297793 Harness into the right Upright, Harness 48 into the Right Handrail, Do not Cut

Page 7

4.While a second person holds the Right Handrail (85) and the Console Base (87) near the right Upright (82), cut the indicated plastic ties off the Right Handrail. Do not cut the other plastic tie off the Right Handrail. Next, cut the plastic tie off the Upright Wire Harness (34) in the right Upright (82). Do not drop the Upright Wire

Harness into the right Upright.

Refer to the inset drawing. Connect the Upright Wire Harness (34) to the Console Wire Harness (48). The latch on the Console Wire Harness should snap onto the Upright Wire Harness. If the Wire Harnesses do not fit together easily, turn them; do not force the Wire Harnesses together.

Next, connect the right pulse wire, the left pulse wire and the ground wire to the corresponding connectors on the Console Wire Harness (48); make sure that the wires with tags are connected to each other.

5.Note that there is still a wire tie in the Right Handrail (85); do not remove this wire tie.

Set the left side of the Console Base (87) on the Left Handrail (74). Insert as much of the wires as possi- ble into the Right Handrail (85) and down into the right Upright (82).

Next, set the right side of the Console Base (87) on the Right Handrail (85). Insert all excess Console Wire

Harness (48) into the Right Handrail.

6.Position the Right Handrail (85) on the right Upright (82) as shown; be careful not to damage the wires. The bracket on the base of the right Upright should be inside of the lower end of the right Handrail, as shown in the inset drawing.

Thread two Handrail Bolts (78) with Washers (36) into the Left Handrail (74) and the left Upright (82) as shown. Do not tighten the Handrail Bolts yet. Next, thread two Handrail Bolts (78) with Washers (36) into the Right Handrail (85) and the right Upright (82). Do not tighten the Handrail Bolts yet. Be careful to avoid damaging the wires.

7

4

87

 

 

 

48

 

 

 

 

 

 

 

 

 

34

 

 

Do not

 

 

 

 

 

cut

 

Left

 

 

 

 

Right

Ground

Cut

 

 

Wire

Wire

Plastic

 

 

85

 

 

Ties

 

 

 

 

48

 

34

Cut Plastic Tie

 

 

 

 

 

 

 

 

 

82

 

 

5

 

 

 

 

Do not

 

 

 

 

 

 

 

 

87

Remove

 

 

 

Wire Tie

 

 

 

48

 

85

 

 

 

 

 

 

 

 

Wires

 

 

74

 

 

 

 

 

 

 

 

82

 

 

6

 

 

87

 

 

 

 

 

78

 

 

78

 

 

36

 

 

 

 

 

 

36

 

 

 

 

 

82

 

85

82

 

74

 

 

 

 

 

 

 

 

 

 

 

85

36

78

 

 

Bracket

Image 7
Contents SEARS, Roebuck and CO., Hoffman ESTATES, IL Model No Serial NoTable of Contents Important Precautions Page Left Side Right Side Before YOU BeginAssembly Harness 48 into the Right Handrail Harness into the right UprightDo not Cut Page HOW to Plug in the Power Cord Operation and AdjustmentPerformant Lubetm Walking Belt STEP-BY-STEP Console Operation Console DiagramFeatures of the Console On the face of the console, remove it KeyChange the speed of the walking belt as desired by CALS/FAT Cals DISTANCE/LAPSPulse Sensor TROUBLE-SHOOTING Information ModeWhenkey. you are finished exercising, remove HOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Move the TreadmillTop Maintenance and TROUBLE-SHOOTINGSymptom the Power does not Turn on Symptom the Power Turns OFF During USESymptom The walking belt is off-center Symptom The walking belt slows when walked onSymptom The walking belt slips when walked on Exercise Intensity Conditioning GuidelinesWorkout Guidelines Suggested Stretches Key Qty Description Part LISTÑModel NoExploded DRAWINGÑModel No 114 108 103 104 107 101 105 36 78 100 Model No Full 90 DAY WarrantySEARS, Roebuck and CO., Dept WA, Hoffman ESTATES, IL