ProForm PFTL413040, 445i user manual Assembly, Make sure that the power cord is not plugged

Page 6

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench

and 90° screwdriver and your own Phillips screwdriver and needlenose pliers .

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

For help identifying the assembly hardware, see the drawings below. Note: The assembly hardware and other small parts are packaged in separate part bags.

Weight Rack Bolt (121)–4	1/2” Silver Screw (107)–1	3/4” Screw (39)–6
Wheel Bolt (86)–2		1” Tek Screw (115)–4
	Nut (122)–4	1” Tek Screw (115)–4
	Nut (122)–4
2 1/2” Bolt (56)–4
2 3/4” Bolt (47)–4	Star Washer (81)–4	Washer (29)–4
4” Bolt (120)–2

1.Make sure that the power cord is not plugged in.

With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (12) so that the treadmill will be more stable. Do not fully fold the treadmill until it is completely assembled.

Attach the four Base Pads (97) to the bottom of the Base (82) with four 1” Tek Screws (115) (only two Base Pads and 1” Tek Screws are shown.

1	115
	115
	97
	97
	82
	12
	115

6

Image 6

Contents QUESTIONS? Model No. PFTL413040 Serial NoCustomer HOT Line Table of Contents Important Precautions Page Before YOU Begin Back Right SideAssembly Make sure that the power cord is not pluggedDo not overtighten the Wheel Bolt the Wheel must be Careful not to pinch the wires. Insert two 2 3/4 BoltsRight side. Be careful not to damage the Upright Wire Able to turn freelyRack Bolts and Nuts before tightening any of them Top View Operation and Adjustment HOW to Plug in the Power CordPerformant Lubetm Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeMeasure your heart rate, if desired Turn on the fan if desiredWhenkey. you are finished exercising, remove Insert the key fully into the console HOW to USE a Speed ProgramWhen the program is completed, remove Key from the console Select a speed programHOW to Connect Your Portable Stereo HOW to Connect Your Home Stereo HOW to Connect Your ComputerHOW to Connect Your VCR Adapter Audio CablePressVCR. the Play button on your CD player or Whenkey. the program is completed, removeHOW to USE Programs Directly from OUR WEB Site Follow the on-line instructions to start ProgramReturn to the treadmill and stand on the foot Information Mode HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useTop Problem The walking belt slows when walked on Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Page R1004B Key Qty DescriptionModelNo. PFTL413040 Exploded DRAWING-Model No. PFTL413040 Part 2 R1004B Exploded DRAWING-Model No. PFTL413040 Part 3 R1004B HOW to Order Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT