ProForm PFT39110.0 user manual Assembly

Page 6

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly re- quires two persons. Set the treadmill in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or to the shipping carton. This is normal and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe it off with a soft cloth and mild, non-abrasive cleaner.

Assembly requires the included hex keys

and your own Phillips screwdriver

, rubber

.

mallet

, adjustable wrench

, wire cutters

, and needlenose pliers

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: Some small parts may have been pre-assembled. To avoid dam- aging parts, do not use power tools for assembly. Extra hardware may be included.

1/4" Star

 

1/4" Washer

5/16" Star

 

3/8" Star

3/8" Washer

Washer (11)–6

(31)–2

 

Washer (5)–4

Washer (9)–4

 

 

 

 

 

 

 

(10)–2

 

 

1/4" Nut (4)–4

 

3/8" Nut (13)–4

Wheel Spacer

 

 

 

 

 

(83)–4

 

#8 x 1/2"

 

#8 x 3/4"

1/4" x 1/2"

1/4" x 1 1/2" Bolt (3)–6

5/16" x 3/4"

Screw (12)–1

Screw (7)–6

Bolt (6)–4

 

 

Bolt (2)–4

3/8" x 2 1/4" Bolt (8)–6

 

 

 

3/8" x 2 1/2" Bolt (1)–2

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT QUESTIONS?Model No. PFTL39110.0 Serial No On the WEBTable of Contents Important Precautions Treadmill, and before performing the main Before YOU Begin Assembly Page Does not fall into the Right Upright See the far right drawing. Tie the wire tieMake sure that the end of the Upright Wire See the left inset drawing. Identify the twoPage Careful not to pinch any wires Bracket 70. Orient the Pulse Assembly soStart all four Bolts, and then firmly tighten Each of them Become Damaged When YOU Turn on Power If YOU do not Connect the CONNectors PROPERLY, the Console MAY 2 Bolts Side View View from Above Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleInsert the key into the console HOW to Turn on the PowerHOW to USE the Manual Mode Start the walking beltMeasure your heart rate if desired. Before using HOW to USE a Preset Application Information Mode HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useCompatible with GFCI-equipped outlets Top View Problem The walking belt slows when walked onKey and Unplug the Power CORD. Using Walking belt has shifted to the right, turn the leftWorkout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. PFTL39110.0 Key No. Qty DescriptionExploded Drawing R0610A Exploded Drawing C-Model No. PFTL39110.0 Exploded Drawing D-Model No. PFTL39110.0 Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT
Top Page Image Contents