ProForm PFTL13011.0 user manual Assembly, Make sure that the power cord is unplugged

•To hire a service technician to assemble this product in your home, call 1-800-445-2480.

•Assembly requires two persons.

•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish assembly.

•After shipping, there may be an oily substance on the exterior of the treadmill or on the shipping carton. This is normal. If there is an oily sub- stance on the treadmill, wipe it off with a soft cloth and a mild, non-abrasive cleaner.

•To identify small parts, see page 6.

•Assembly requires the following tools:

the included hex keys one adjustable wrench one Phillips screwdriver

To avoid damaging parts, do not use power tools.

1.Make sure that the power cord is unplugged.

Attach the Left Wheel Cap (103) to the Base (105) with two #8 x 3/4" Screws (2).

Attach the Right Wheel Cap (not shown) to the right side of the Base (105) in the same way.