ProForm PFTL13011.0 user manual See the inset drawing. Tie the wire tie

2. Pull the Upright Wire (88) and the Base Ground	2
Wire (100) through the indicated hole in the
Base (105).
Attach the Base Ground Wire (100) to the Base
(105) with a #8 x 1/2" Ground Screw (10).
Press the Grommet (101) into the square hole in
the Base (105).
	101
	Hole
	88
	100
	10	105
3. Identify the Left Upright (90), which is marked	3
“Left.” Have a second person hold the Left	88
Upright near the Base (105).
	90
See the inset drawing. Tie the wire tie in the
Left Upright (90) securely around the end of the		Wire
Upright Wire (88). Then, pull the other end of the			88
		Tie
wire tie until the Upright Wire is routed through
the Left Upright.
	Wire
	Tie
	90
	88	105
	8