ProForm PFTL31330, 325i Performant Lube, HOW to Plug in the Power Cord, Grounded Outlet Box

Page 10

OPERATION AND ADJUSTMENT

THE PERFORMANT LUBE

TM WALKING BELT

Your treadmill features a walking belt coated with

PERFORMANT LUBETM , a high-performance lubricant.

IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form. Such substances will deteriorate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

DANGER: Improper connection of the equipment-grounding conductor can

result in an increased risk of electric shock. Check with a qualified electrician or service- man if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product—if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

Your treadmill, like any other type of sophisticated electronic equipment, can be seriously damaged by sudden voltage changes in your home’s power. Voltage surges, spikes, and noise interference can result from weather conditions or from other appliances

being turned on or off. To decrease the possibility of your treadmill being damaged, always use a surge

suppressor with your treadmill (see drawing 1 at the right). To purchase a surge suppressor, see

your local PROFORM dealer or call 1-800-806-3651 and order part number 146148.

Use only a single-outlet surge suppressor that is UL 1449 listed as a transient voltage surge sup- pressor (TVSS). The surge suppressor must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules.

The surge suppressor must be electrically rated for 120 volts AC and 15 amps. There must be a monitoring light on the surge suppressor to indi- cate whether it is functioning properly. Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may change speed or stop unexpect- edly, which may result in a fall and serious injury.

This product must be grounded.If it should malfunc-

tion or break down, grounding provides a path of least resistance for electric current to reduce the risk of elec- tric shock. This product is equipped with a cord having

an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, and plug the surge suppressor into an appropriate

outlet that is properly installed and grounded in accordance with all local codes and ordinances. Important: The treadmill is not compatible with GFCI-equipped outlets.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illus- trated in drawing 1 below. A temporary adapter that looks like the adapter illustrated in drawing 2 may be used to connect the surge suppressor to a 2-pole receptacle as shown in drawing 2 if a properly grounded outlet is not available.

1

Grounded Outlet Box

 

Surge Suppressor

 

Grounding Pin

Grounding Pin

 

Grounded Outlet

Grounding Plug

 

2

Grounded Outlet Box

Adapter

Surge Suppressor

Lug

Metal Screw

The temporary adapter should be used only until a properly grounded outlet (drawing 1) can be installed by a qualified electrician.

The green-colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent

ground such as a properly grounded outlet box cover. Whenever the adapter is used it must be held in place

by a metal screw. Some 2-pole receptacle outlet box covers are not grounded. Contact a qualified elec-

trician to determine if the outlet box cover is grounded before using an adapter.

10

Image 10
Contents Model No. PFTL31330 Serial No To Avoid DELAYS, Please Call Direct to OUR TollQUESTIONS? Customer HOT LineTable of Contents Same circuit. Do not use an extension cord Important PrecautionsUse the treadmill only as described Never leave the treadmill unattended while itPage Before YOU Begin Using the treadmillBack Until instructed to do so AssemblyAdjustable wrench Wire cutters Tighten the NutCareful not to damage the Wire Harness Open part bag CSide of the Right Handrail TouchEnds of the plastic ties Make sure Firmly tighten the 1 Bolts 63Handrails. Firmly tighten the 3 Bolts This product must be grounded.If it should malfunc HOW to Plug in the Power CordPerformant Lube Grounded Outlet BoxConsole Diagram STEP-BY-STEP Console OperationHOW to USE the Hand Weights HOW to Fold the Treadmill for Storage HOW to Move the TreadmillHOW to Lower the Treadmill for USE FrameSolution TroubleshootingPower Cord Come damaged. Remove the key Problem The walking belt slows when walked onUnplug the Power Cord Belt has shifted to the leftWorkout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Page Key No. Qty Description Red Wire, 2FWasher Belly Pan R0903B Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty Part No R0903B