ProForm PFTL31330, 325i Assembly, Adjustable wrench Wire cutters, Until instructed to do so

Page 6

ASSEMBLY

Assembly requires two persons.Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrenches

and your own phillips screwdriver

,

adjustable wrench

, wire cutters

, and needlenose pliers

.

For help identifying the assembly hardware, refer to the PART IDENTIFICATION CHART below. Note: The assembly hardware and other small parts are packaged in separate part bags. Do not open the part bags

until instructed to do so.

1” Tek Screw (37)–4

1/2” Silver Screw

3/4” Screw (2)–15

Crossbar Screw

(49)–2

 

(39)–2

 

 

1” Bolt (63)–4

2” Bolt (114)–4

1/4” Star

 

 

 

5/16” Star

 

 

Washer (76)–4

 

 

 

Washer (48)–4

Wheel Bolt (64)–2

 

 

 

 

 

1/4” Washer

 

3” Bolt (61)–4

 

(38)–4

Wheel Nut (13)–2

1. Make sure that the power cord is unplugged.

1

 

 

 

 

 

 

 

 

 

 

64

 

 

 

 

86

 

 

66

 

69

 

 

 

 

57

 

 

 

37

57

 

 

 

 

 

 

13

 

 

With the help of a second person, carefully tip the tread-

 

 

mill onto its left side as shown. Partially fold the Frame

 

 

(86) so that the treadmill is more stable.

Do not fully

 

37

fold the treadmill until it is completely assembled.

 

 

 

Open part bag A.

Attach four Base Pads (57) to the bot-

 

 

tom of the Base (69) with four 1” Tek Screws (37) (three

 

 

are shown).

 

 

37

 

Attach a Wheel (66) to the inner side of the Base (69) with

 

57

a Wheel Bolt (64) and a Nut (13) as shown.

Do not over-

 

 

 

tighten the Nut.

The Wheel should be able to spin freely.

 

 

6

Image 6
Contents Model No. PFTL31330 Serial No To Avoid DELAYS, Please Call Direct to OUR TollQUESTIONS? Customer HOT LineTable of Contents Same circuit. Do not use an extension cord Important PrecautionsUse the treadmill only as described Never leave the treadmill unattended while itPage Using the treadmill Before YOU BeginBack Until instructed to do so AssemblyAdjustable wrench Wire cutters Tighten the NutCareful not to damage the Wire Harness Open part bag CTouch Side of the Right HandrailEnds of the plastic ties Firmly tighten the 1 Bolts 63 Make sureHandrails. Firmly tighten the 3 Bolts This product must be grounded.If it should malfunc HOW to Plug in the Power CordPerformant Lube Grounded Outlet BoxConsole Diagram STEP-BY-STEP Console OperationHOW to USE the Hand Weights HOW to Fold the Treadmill for Storage HOW to Move the TreadmillHOW to Lower the Treadmill for USE FrameTroubleshooting SolutionPower Cord Come damaged. Remove the key Problem The walking belt slows when walked onUnplug the Power Cord Belt has shifted to the leftWorkout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Page Red Wire, 2F Key No. Qty DescriptionWasher Belly Pan R0903B Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty Part No R0903B