ProForm PCTL62590 Problem The walking belt slows when walked on, Come damaged. Remove the key

Page 13

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a CUL-listed surge suppressor, rated at 15 amps, with a 1mm (5 ft.) or less in length.

b. If the walking belt is overtightened, treadmill perfor-

mance may decrease and the walking belt may be-

 

come damaged. Remove the key and

UNPLUG THE

POWER CORD

. Using the allen wrench, turn both

rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 7 to 10 cm (3 to 4 in.) off the walking platform. Be careful to keep the walking belt centred. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

2

(14-gauge) cord of 1,5 m

b

 

7–10 cm

 

Rear Roller Adjustment Bolts

c. If the walking belt still slows when walked on, please call our Customer Service Department.

PROBLEM: The walking belt is off-centre or slips when walked on

 

SOLUTION:

a. If the walking belt has shifted to the left,

first re-

 

move the key and

UNPLUG THE POWER CORD

.

 

Using the allen wrench, turn the left rear roller bolt

 

 

clockwise 1/2 of a turn. Be careful not to overtighten

 

 

the walking belt.

If the walking belt has shifted to

 

the right,turn the left rear roller bolt counterclockwise

 

 

1/2 of a turn. Plug in the power cord, insert the key

 

 

and run the treadmill for a few minutes. Repeat until

 

 

the walking belt is centered.

 

b. If the walking belt slips when walked on, first remove

the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment

bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each side of the walking belt 7–10 cm (3–4 in.) off the walking platform. Be careful to keep the walking belt centred. Plug in the power cord, insert the key and carefully walk on the treadmill for a few minutes.

Repeat until the walking belt is properly tightened.

a

b

PROBLEM: The incline of the treadmill does not change correctly or does not change when iFIT.com

CD’s and videos are played

SOLUTION:

a. With the key in the console, press one of the INCLINE buttons.

While the incline is changing,

 

remove the key.

After a few seconds, re-insert the key. The treadmill will automatically rise to the

 

maximum incline level and then return to the minimum level. This will recalibrate the incline system.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Model No. PCTL62590 Serial No QUESTIONS?Serial Number Decal Important Precautions Table of ContentsPulse sensor is not a medical device Treadmill is capable of high speedsMove the Treadmill on This treadmill is intended for in-home useFor your benefit, read this manual carefully before Before YOU BeginLeft Side Assembly requires two people AssemblyPose of the packing materials until assembly is completed Adjustable wrench ScissorsTighten all parts used in steps 3, 4, 5 Ily, turn them do not force them togetherMake sure that all parts are tightened before you Trician to determine if the outlet box cover is Operation and AdjustmentRight GroundedPressmode. the Mode button to select the desired Is in the console when the power cord is pluggedSTEP-BY-STEP Console Operation Insert the key fullyPress the START/STOP button If the manual mode is selectedAs you exerciseIf a workout program is selected The speed Four displays Information Mode When you are finished, remove the key 7Measure your heart rate, if desired Press too hard Or the circulation Your thumbHOW to Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Lower the Treadmill for USE Solution Maintenance and TROUBLE-SHOOTINGPower Cord Come damaged. Remove the key Problem The walking belt slows when walked onIf the walking belt has shifted to the left Remove the keyExercise Intensity Conditioning GuidelinesWorkout Guidelines Exercise FrequencyOrdering Replacement Parts Icon of CANADA, 900 de l’Industrie, St. Jerôme, QC J7Y 4B8 Limited WarrantyIs a registered trademark of Icon Health & Fitness, Inc Part No R1101ASave this page for future reference Key Qty Description Part LIST-Model No. PCTL62590Frame Incline Bolt R1101A
Top Page Image Contents