ProForm Lwufp See the inset drawing. Tie the wire tie, Be careful not to pinch the Upright Wire

3. Identify the Right Upright (76), which is marked	3
“Right.” Have a second person hold the Right
Upright near the Base (74).
See the inset drawing. Tie the wire tie in the				63
Right Upright (76) securely around the end of			76
the Upright Wire (63). Then, insert the Upright
Wire into the lower end of the Right Upright as		63
you pull the other end of the wire tie through the	Wire Tie
Right Upright.
				Wire
				Tie
			76
			74
4. Hold the Right Upright (76) against the Base	4
(74). Be careful not to pinch the Upright Wire
(63).
Insert a 3/8" x 3 1/4" Screw (2) with a 3/8" Star			76
Washer (3) into the top hole in the Right Upright
(76). Then, partially tighten the Screw into the
Base (74).
Partially tighten two more 3/8" x 3 1/4" Screws
(2) with two 3/8" Star Washers (3) into the Right
Upright (76) and the Base (74); do not fully
tighten the Screws yet.
				3
			63
		74	3	2
	8