JVC FS-A52 manual To connect an outdoor FM antenna, To connect an outdoor AM antenna

Page 10

Connecting Antennas

FM antenna

ANTENNA
AM	AM	EXT

	LOOP
FM(75Ω)
COAXIAL

FM antenna (supplied)

AM antenna

	1	2
	ANTENNA			Vinyl-covered wire
				(not supplied)
		AM
	AM		EXT

		LOOP
	FM(75Ω)
	COAXIAL

1Attach the FM antenna to the FM (75 Ω) COAXIAL terminal.

2Extend the FM antenna.

3Fasten it up in the position which gives you the best reception.

About the supplied FM antenna

The FM antenna supplied with this unit can be used as temporary measure. If reception is poor, you can connect an outdoor FM antenna.

To connect an outdoor FM antenna

Before connecting it, disconnect the supplied FM antenna.

Outdoor FM antenna (not supplied)

ANTENNA
AM	AM	EXT

	LOOP
FM(75Ω)
COAXIAL

A 75 Ω antenna with coaxial type connector should be used.

3

AM loop antenna

(supplied)

1If cords are covered with insulation, twist the core of the cord at the end of each cord, then remove the insulation.

2Connect the AM loop antenna to the AM LOOP terminals as illustrated.

3Turn the AM loop antenna until you have the best reception.

To connect an outdoor AM antenna

When reception is poor, connect a single vinyl-covered wire to the AM EXT terminal and extend it horizontally. The AM loop antenna must remain connected.

For better reception of both FM and AM

•Make sure the antenna conductors do not touch any other terminals and connecting cords.

•Keep the antennas away from metallic parts of the unit, connecting cords, and the AC power cord.

– 7 –

Image 10

Contents Compact Component System FS-A52- Consists of CA-FSA52 and SP-UXA52Mises en garde, précautions et indications diverses Class 1 Laser Product Produit Laser ClasseFor Canada/pour le Canada Precautions IntroductionContents Top view Location of the ButtonsMain Unit Front viewDisplay-indicators Main unitRemote Control Remote controlGetting Started Putting the Batteries into the Remote ControlUnpacking To connect an outdoor FM antenna FM antennaAM antenna To connect an outdoor AM antennaTo remove the speaker grilles Connecting SpeakersTo connect speakers To attach the speaker grille, put the projectionsTo connect analog audio equipment Connecting Other EquipmentTo stop and cancel the display demonstration, press For playing the other equipment through this unitMain unit Top view Basic and Common OperationsMain unit Front view Turning On the Power Selecting the Sources and Starting PlayReinforcing the Bass Sound Adjusting the VolumeTurning On/Off the Key-touch Tone Selecting the Sound ModesTo select the color pattern Setting the Display IlluminationTo adjust and register the color To select TODAY’S ColorListening to FM and AM Broadcasts Presetting Stations Tuning in a StationTo change the FM reception mode Tuning in a Preset Station To check the clock time while listening to the broadcastCancel Playing Back a CDPrecautions on CD Playback Playing Back the Entire CD-Normal PlayBasic CD Operations Program Play To check the program contentsTo modify the program Repeating Tracks-Repeat Play Playing at Random-Random PlayTo skip the current track, press ¢ Playing Back a Tape DisplayPlaying Back a Tape To play both sides-Reverse ModeTo check the clock time while playing back a tape Using External Equipment Mode PROPress AUX/MD Listening to External EquipmentRecording from This Unit to External Equipment Play the CD Player of this unitRecording on Tapes For recording operations, mainly use the buttons on the unitTo keep the best recording and playback sound quality Before You Start RecordingTo protect your recordings To demagnetize the headRecording FM/AM Broadcasts What’s a Recording Mode and Reverse Mode ?Recording CD-CD Synchronized Recording Recording External Equipment To record a single track during play or pauseUsing the Timers Using Recording Timer Setting the ClockHow Recording Timer actually works Press SET When you have selected from FM or Using Daily TimerHow Daily Timer actually works To turn off the Recording Timer after its setting is doneTimer-off time, then press SET Timer-on time, then press SETHour digit of timer-off time starts flashing on Minute digit of timer-off time starts flashing onTimer Priority Using Sleep TimerHow Sleep Timer actually works General Notes MaintenanceCleaning the unit Handling discsTroubleshooting Output Power 40 W 20 W + 20 W at 4 Ω 10 % THDAuthorized Service Centers Limited Warranty JVC 0102MWMMDWJEM