JVC FS-A52 Setting the Display Illumination, To select the color pattern, To select TODAY’S Color

Page 16

Setting the Display Illumination

You can change the color and brightness of the display illumination.

To select the color pattern

You can select the color pattern by your preference.

While the unit is turned on, press COLOR repeatedly until the color pattern you want appears on the display.

Each time you press the button, the color pattern changes as follows:

COLORCOLOR

RANDOMGRADATION

COLOR 1

TODAY’S

COLOR #*

– COLOR 7

DAILY

 

COLOR RANDOM: Changes the illumination color randomly every 2 seconds.

COLOR GRADATION:

Changes the illumination color gradually.

TODAY’S COLOR #* DAILY:

Changes the illumination color every day. You can select which color to start with. (See “To select TODAY’S COLOR” to the right column.)

*The color number of TODAY’S COLOR is selected from COLOR 1 – 7.

COLOR 1 – 7: You can adjust and register the color from COLOR 1 to 7. (See “To adjust and register the color” to the right column.)

If you press COLOR while the unit is turned off, the display illumination will start (see page 9.)

More on the display illumination

The colors shown on the display cannot always be reproduced precisely. Due to the circumstances (room temperature, etc.) where the unit is used, colors may vary slightly.

When you change the color of the display, the display may seem to move back and forth; this is a characteristic of this unit and is not a malfunction.

When a strong light strikes the display, the display happens to become dark, but this is not a malfunction.

To adjust and register the color

You can adjust the color by changing the tone, whiteness, brightness, and register into COLOR 1 to 7.

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the remote control ONLY:

1 Press COLOR repeatedly until the color number (COLOR 1 to 7) you want to adjust appears on the display.

The adjustment bars appear on the display.

2 Adjust the tone, whiteness, and brightness.

1)Press = or + to select the level you want and press SET.

Each time you press SET, the adjustment items change.

The tone can be adjusted in 14 patterns. The whiteness can be adjusted in 3 levels and the brightness can be adjusted in 2 levels.

2)Repeat 1) to adjust “WHITENESS” and “BRIGHTNESS.”

If the whiteness is set to the right end, the tone you adjusted will be no longer valid.

To select “TODAY’S COLOR”

The illumination color changes automatically each time the built-in clock becomes “AM12:00.”

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the remote control ONLY:

1 Press COLOR repeatedly until “TODAY’S COLOR” appears on the display.

2 Press = or + to select the color number (COLOR 1 to 7.)

To dim the display

This function can be used only while the unit is turned on.

On the remote control ONLY:

To dim the display, press DIMMER.

To brighten the display, press DIMMER again.

Pressing COLOR also brightens the display.

– 13 –

Image 16
Contents Compact Component System FS-A52- Consists of CA-FSA52 and SP-UXA52Mises en garde, précautions et indications diverses Class 1 Laser Product Produit Laser ClasseFor Canada/pour le Canada Precautions IntroductionContents Location of the Buttons Main UnitTop view Front viewDisplay-indicators Main unitRemote Control Remote controlGetting Started Putting the Batteries into the Remote ControlUnpacking FM antenna AM antennaTo connect an outdoor FM antenna To connect an outdoor AM antennaConnecting Speakers To connect speakersTo remove the speaker grilles To attach the speaker grille, put the projectionsConnecting Other Equipment To stop and cancel the display demonstration, pressTo connect analog audio equipment For playing the other equipment through this unitMain unit Top view Basic and Common OperationsMain unit Front view Turning On the Power Selecting the Sources and Starting PlayAdjusting the Volume Turning On/Off the Key-touch ToneReinforcing the Bass Sound Selecting the Sound ModesSetting the Display Illumination To adjust and register the colorTo select the color pattern To select TODAY’S ColorListening to FM and AM Broadcasts Presetting Stations Tuning in a StationTo change the FM reception mode Tuning in a Preset Station To check the clock time while listening to the broadcastCancel Playing Back a CDPrecautions on CD Playback Playing Back the Entire CD-Normal PlayBasic CD Operations Program Play To check the program contentsTo modify the program Repeating Tracks-Repeat Play Playing at Random-Random PlayTo skip the current track, press ¢ Playing Back a Tape DisplayPlaying Back a Tape To play both sides-Reverse ModeTo check the clock time while playing back a tape Using External Equipment Mode PROListening to External Equipment Recording from This Unit to External EquipmentPress AUX/MD Play the CD Player of this unitRecording on Tapes For recording operations, mainly use the buttons on the unitBefore You Start Recording To protect your recordingsTo keep the best recording and playback sound quality To demagnetize the headRecording FM/AM Broadcasts What’s a Recording Mode and Reverse Mode ?Recording CD-CD Synchronized Recording Recording External Equipment To record a single track during play or pauseUsing the Timers Using Recording Timer Setting the ClockHow Recording Timer actually works Using Daily Timer How Daily Timer actually worksPress SET When you have selected from FM or To turn off the Recording Timer after its setting is doneTimer-on time, then press SET Hour digit of timer-off time starts flashing onTimer-off time, then press SET Minute digit of timer-off time starts flashing onTimer Priority Using Sleep TimerHow Sleep Timer actually works Maintenance Cleaning the unitGeneral Notes Handling discsTroubleshooting Output Power 40 W 20 W + 20 W at 4 Ω 10 % THDAuthorized Service Centers Limited Warranty JVC 0102MWMMDWJEM