JVC FS-A52 manual Using Daily Timer, How Daily Timer actually works

Continued

2 Press 4 to select “ON,” then press SET.

3 Select the source to record.

1)Press ¢ or 4 repeatedly to select the source.

•Each time you press the buttons, the source changes as follows:

FROM AUX FROM FM

FROM AM

2)Press SET.

•When you have selected “FROM FM” or

“FROM AM,” select a preset number by pressing

¢ or 4 (for how to preset stations, see page 15.)

•When you have selected “FROM AUX,” the external equipment also needs to have the timer function.

3)Press SET again.

4 Select the reverse mode either	or by pressing
¢ or 4, then press SET.

•For reverse mode, see page 28.

5 Set the timer-on and timer-off time.

1)Press ¢ or 4 repeatedly to select the hour of the timer-on time, then press SET.

The minute digit of timer-on time starts flashing on the display.

To turn off the Recording Timer after its setting is done,

1Press CLOCK/TIMER repeatedly until “REC TIMER” appears on the display.

2Press ¢ to select “OFF,” then press SET.

The timer ( ) and REC indicators go off from the display.

To turn on the Recording Timer again, press 4 to select “ON”, then press SET.

The timer ( ) and REC indicators light on the display. The settings you have done are shown on the display for your confirmation.

If you stop recording during Recording Timer

The recording is canceled, but when the timer-off time comes, the unit turns off.

When you unplug the AC power cord or if a power failure occurs

The timer setting, the tuner preset stations and other settings will be erased.

Using Daily Timer

With Daily Timer, you can wake up to your favorite music or radio program.

•You can set Daily Timer whether the unit is turned on or off (on standby.)

•To correct a misentry any time during the setting process, press CANCEL.

» »

Timer-on time Timer-off time

2)Press ¢ or 4 repeatedly to select the minute of the timer-on time, then press SET.

The hour digit of timer-off time starts flashing on the display.

3)Press ¢ or 4 repeatedly to select the hour of the timer-off time, then press SET.

The minute digit of timer-off time starts flashing on the display.

4)Press ¢ or 4 repeatedly to select the minute of the timer-off time, then press SET.

•The setting you have done are shown on the display in sequence.

•The REC indicator stops flashing and remains lit.

6 Press STANDBY/ON to turn off the unit (on standby) if necessary.

•No sounds come out while timer recording is performed.

How Daily Timer actually works

The unit automatically turns on, and starts playing the specified source when the timer-on time comes. (While Daily Timer is working, the DAILY indicator keeps flashing.) Then, when the timer-off time comes, the unit automatically turns off (on standby.)

Daily Timer works every day, and the timer settings remain stored in memory unless you reset them or unplug the AC power cord.

– 32 –