ProForm PFBE66080 manual

Page 9

11.Press a 2Ó Square Inner Cap (17) into the indicated ends of the Right and Left Base (25, 26).

12.Attach the Joiner Bracket (27) to the Right Base (25) with two M10 x 65mm Bolts (5), four M10 Washers

(6) and two M10 Nylon Locknuts (1). Do not tighten the Nylon Locknuts yet.

Attach the Left Base (26) to the Joiner Bracket (27) with two M10 x 65mm Bolts (5), four M10 Washers

(6)and two M10 Nylon Locknuts (1). Do not tighten the Nylon Locknuts yet.

11
		25
26		17
26
	17
12
	1	25
		6
1	6
		6
		27
		5
	6	5
26		5
26

9

Image 9

Contents Patent Pending Model No. PFBE66080 Serial NoCustomer HOT Line Table of Contents Important Precautions Before You Begin Assembled DimensionsPart Identification Chart Model No. PFBE66080 R0200A Locknut. You must be able to freely pivot the Decline Strut AssemblyPage Page Page Not tighten the Nylon Locknut yet Do not tighten the Nylon Locknuts yetTop Frame fit into the Uprights Page Page Using the Barbell Racks Adjusting the Weight BenchAdjusting the Backrest Adjusting the Seat InclineAttaching Weights to the LEG Lever Locking the LEG LeverSecuring Weights with the Spring Clips Attaching Weights to the Weight CarriagesExercise Guidelines Muscle Chart Cooling DownStaying Motivated Date Exercise Weight Sets RepsAerobic Exercise Thursday Aerobic Exercise DateQty Description Part List Model No. PFBE66080Exploded Drawing Model No. PFBE66080 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT