MAINTENANCE AND STORAGE
Inspect and tighten all parts of the recumbent bike regularly. The recumbent bike can be cleaned with a soft, damp cloth. To prevent damage to the console, keep liquids away and keep the console out of direct sunlight.
BATTERY REPLACEMENT
If the console does not function properly, the batteries should be replaced. To replace the batteries, refer to assembly step 12 on page 7.
CRANK ADJUSTMENT
driver in one of the slots in the slotted bearing nut. Lightly tap the screwdriver with a hammer to turn the slotted bearing nut counterclockwise until the arms are no longer loose. Do not overtighten the slotted bearing nut. When the slotted bearing nut is properly tightened, tighten the crank nut.
HOW TO STORE THE RECUMBENT BIKE
When the recum- |
| |
bent bike is not in | 1 | |
use, it can be | ||
68 | ||
folded for com- |
| |
pact storage. |
|
If the arms of the Crank (29) become loose, they should be tightened in order to prevent excessive wear. Loosen the crank nut on the left arm of the Crank. Place the end of a standard screw-
| Slotted |
| Bearing |
Crank | Nut |
| |
Nut |
|
| 29 |
Refer to the |
|
drawing at the |
|
right. Loosen the |
|
Lock Knob (68) | 3 |
on the right side |
|
of the Frame (1). |
|
Slide the Seat |
|
Frame (3) as far |
|
into the Frame as |
|
it will go. Tighten the Lock Knob. Store the recumbent bike indoors, away from moisture and dust.
12