ProForm PFEX31420 user manual Maintenance and Troubleshooting, Battery Replacement

Page 16

MAINTENANCE AND TROUBLESHOOTING

Inspect and properly tighten all parts of the recumbent cycle regularly. To clean the recumbent cycle, use a soft, damp cloth.

To prevent damage to the console, keep liquids away from the console, keep the console out of direct sun- light, and remove the batteries when storing the recumbent cycle.

BATTERY REPLACEMENT

If the console display becomes dim, the batteries should be replaced. Refer to assembly step 3 on page 5 for replacement instructions.

PULSE SENSOR TROUBLESHOOTING

Avoid moving your hands while using the pulse sen- sor. Excessive movement may interfere with heart rate readings. Do not hold the metal contacts too tightly; doing so may interfere with heart rate read- ings.

For the most accurate heart rate reading, hold the metal contacts for about 15 seconds.

For optimal performance of the pulse sensor, keep the metal contacts clean. The contacts can be cleaned with a soft cloth—never use alcohol, abrasives, or chemicals.

SEAT ADJUSTMENT TROUBLESHOOTING

HOW TO ADJUST THE REED SWITCH

If the console does not display correct feedback, the reed switch should be adjusted. To adjust the reed switch, the Left Side Shield (4) must be removed. Using an adjustable wrench, turn the Left Pedal (69) clockwise and remove it. Next, remove the indicated Screws (64, 76). Turn the Left Crank Arm (51) so that it is pointing toward the front of the recumbent cycle and then slide off the Left Side Shield.

 

 

4

76

 

 

69

 

76

 

 

 

64

76

 

 

Next, locate the Reed Switch (61). Turn the Left Crank Arm (51) until the Magnet (59) is aligned with the Reed Switch. Loosen, but do not remove, the indi-

If the seat does not stay in place while you are ped- aling, screw the Brake Pad (85) farther out of the Seat Adjustment Tab (79), down toward the Seat Rail (7).

79

85

7

cated Screw (64). Slide the Reed Switch slightly clos- er to or away from the Magnet. Retighten the Screw. Turn the Crank for a moment. Repeat until the con- sole displays correct feedback. When the Reed Switch is correctly adjusted, reattach the left side shield and the left pedal.

64

59

 

61

51

 

16

Image 16
Contents Model No. PFEX31420 Serial No QUESTIONS?Customer HOT Line Table of Contents Important PrecautionsBefore YOU Begin FrontBack Right SideAssembly Extension Wire are not pinched Page HOW to Operate the Recumbent Cycle HOW to Adjust the Position of the SeatAB CD Features of the Console Console Description HOW to USE the Manual Mode Select the manual modeBegin pedaling and adjust the resistance of the pedals Turn on the consoleHOW to USE a Smart Program Select one of the eight Smart programsStart the program Follow your progress with the feedback modesHOW to Connect Your Portable Stereo Audio CableHOW to Connect Your Home Stereo HOW to Connect Your ComputerHOW to Connect Your VCR PressVCR. the play button on your CD player orFollow the on-line instructions to start the program HOW to USE Programs Directly from OUR WEB SiteReturn to the recumbent cycle and begin pedaling Battery Replacement Maintenance and TroubleshootingPulse Sensor Troubleshooting Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyExploded DRAWING-Model No. PFEX31420 Description QtyR0802A 2930 Limited Warranty HOW to Order Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT