HOW TO USE THE MANUAL MODE
1begin pedaling to turn on the console.
A moment after you turn on the console, the dis- play will light.Press the Resistance decrease button or
2Select the manual mode.
Each time you turn on the console, the manual mode will be selected automatically. If you have selected a program, reselect the manual mode by pressing the Programs button repeatedly until the words MANUAL MODE appear in the top of the display.
3the pedals as desired.
As you pedal, change the resistance of the ped- als by pressing the Resistance increase and decrease buttons repeatedly. There are ten resis- tance levels. Note: After you press the buttons, it
will take a moment for the pedals to reach the selected resistance level.Begin pedaling and change the resistance of
4Follow your progress with the display.
The left side of the
time. Note: When a program is selected,
the display will show the time remaining in the program instead of the elapsed time. An exception is the heart rate control program, which shows the elapsed time.
The left side of the display will also show your heart rate when you use the handgrip pulse sen- sor (see step 5 on page 14).
When a program is selected, the left side of the display will also show the approximate number of calories you have burned.
The center of the
track that represents
640 revolutions. As you exercise, indicators will appear in succession around the track until the entire track appears. The track will then disappear and the indicators will again begin to appear in succession.
The center of the dis- play will also show the resistance setting of the pedals for a few seconds each time the resistance setting changes.
The right side of the
(total revolutions) you have pedaled and
your pedaling pace, (revolutions per minute [rpm]).
The top of the
13