ProForm PFEL8947.0 HOW to USE a Calorie Goal Program, Select one of the calorie goal programs

Page 17

HOW TO USE A CALORIE GOAL PROGRAM

1begin pedaling to turn on the console.

A moment after you turn on the console, the dis- play will light.Press the Resistance decrease button or

2Select one of the calorie goal programs.

Press the Programs button repeatedly until the name of the desired calorie goal program appears in the display. When a calorie goal pro- gram is selected, the program time will appear in the display and a profile of the resistance settings for the program will scroll across the matrix in the display.

3Begin pedaling to start the program.

Each program is divided into 25, 30, or 45 one- minute segments. One resistance setting and one target rpm (revolutions per minute) setting are programmed for each segment. Note: The same resistance setting and/or target rpm setting may be programmed for two or more consecutive seg- ments. The display for a calorie goal program work in the same way as the display for the cross train- ing programs (see step 3 on page 15).

As you exercise, you will be prompted to near the target rpm setting for the current segment. When the words PEDAL FASTER appear in the display, increase your pace. When the words PEDAL SLOWER appear in the display, decrease your pace. When the words PEDALING IN RANGE appear, maintain your current pace.

Important: The target rpm settings are intend- ed only to provide motivation. Your actual pace may be slower than the target rpm set- tings. Make sure to exercise at a pace that is comfortable for you. Note: If you manually over- ride the resistance settings of a calorie goal pro- gram, you may not reach your calorie goal.

To stop the program at any time, stop pedaling. The time will begin to flash in the display. To restart the program, simply resume pedaling.

When the last segment of the program ends, the words PROGRAM DONE will appear in the dis- play.

4Follow your progress with the display. See step 4 on page 13.

5Measure your heart rate if desired. See step 5 on page 14.

6Change the display color if desired. See step 6 on page 14.

7Turn on the fan if desired. See step 7 on page 14.

8 When you are finished exercising, the console will turn off automatically.

See step 8 on page 14.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Call TOLL-FREE QUESTIONS?Model No. PFEL8947.0 Serial No Table of Contents Important Precautions Before YOU Begin Assembly Page Other Handlebar Leg not shown Same way Ing the Wire Harness 48 between Upright and the FrameAssemble the Right Handlebar not shown Page Grease Repeat this step for the Right Pedal Leg not shown HOW to Move the Elliptical Exerciser HOW to USE the Elliptical ExerciserHOW to Level the Elliptical Exerciser HOW to Exercise on the Elliptical ExerciserFeatures of the Console Select the manual mode HOW to USE the Manual ModeBegin pedaling to turn on the console Pedals as desiredWill turn off automatically Change the display color if desiredTurn on the fan if desired Begin pedaling to start the program HOW to USE a Cross Training ProgramSelect one of the five cross training programs Continue the cross training program PromptedFollow your progress with the display Measure your heart rate if desiredSelect one of the calorie goal programs HOW to USE a Calorie Goal ProgramSelect the high performance program Hold the handgrip pulse sensor Select the heart rate control programEnter a target heart rate Console Troubleshooting Maintenance and TroubleshootingHandgrip Pulse Sensor Troubleshooting HOW to Adjust the Drive BeltCardiovascular Training Guidelines Conditioning GuidelinesStrength Training Guidelines Page Qty Description Part LIST-Model No. PFEL8947.0Qty Description Model No Exploded Drawing B-Model No. PFEL8947.0 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT HOW to Order Replacement PartsLimited Warranty
Top Page Image Contents