ProForm PFEL73207.0 user manual Avoid pinching the Wire Harnesses 18, 38 during this step

Page 9

7.Have a second person hold the Upright (2) near the Frame (1) as shown. Next, connect the Upper Wire Harness (18) to the Lower Wire Harness (38).

Attach the Upright (2) to the Frame (1) with two M8 x 69mm Button Bolts (91), two M8 Split Washers (93), and two M8 Nylon Locknuts (87). Be careful to avoid pinching the wires.

7

2

87

Avoid pinching the Wire Harnesses (18, 38) during this step

18

38

1

93 91

8.Attach the Water Bottle Holder (17) to the Upright (2) with two M4 x 22mm Screws (66).

8

17

2

66

9

Image 9

Contents QUESTIONS? Model No. PFEL73207.0 Serial NoCall TOLL-FREE Table of Contents Important Precautions Before YOU Begin Assembly Page Repeat this step for the Right Pedal Arm not shown Grease Avoid pinching the Wire Harnesses 18, 38 during this step Avoid pinching Wires during this step Page Repeat this step for the Right Upper Body Arm HOW to Move and Level the Elliptical Exerciser HOW to USE the Elliptical ExerciserConsole Diagram Features of the Console HOW to USE the Manual Mode Select the manual modeFollow your progress with the displays Avoid moving your hands or gripping the con- tacts tightly HOW to USE the Stereo Sound System HOW to USE a Target Toning ProgramSelect a target toning program Begin pedaling to start the programMaintenance and Troubleshooting Console TroubleshootingHandgrip Pulse Sensor Troubleshooting Exercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Key No. Qty Description Part LIST-Model No. PFEL73207.0Exploded Drawing A-Model No. PFEL73207.0 R0807A Exploded Drawing B-Model No. PFEL73207.0 R0807A Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT