ProForm PFEX39911 user manual Assembly

ASSEMBLY

Assembly requires two persons. Place all parts of the crosstrainer in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included

allen wrenches, assembly requires a phillips screwdriver , an adjustable wrench

and a rubber mallet .

As you assemble the crosstrainer, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page

22.The second number refers to the quantity used in assembly. Note: Some small parts may have been pre- assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.

M6 Flat		M10 Zinc Split	M10 Black Split	M10 Nylon Black	M10 Zinc Nylon
Washer (71)–3	Washer (85)–2		Washer (77)–3	Locknut (63)–2	Locknut (66)–2
M4 x 16mm		M6 x 16mm	M6 x 50mm Screw		M6 x 25.4mm Button
Screw (73)–1		Screw (87)–5		(69)–3	Screw (79)–1
M10 x 27mm Button		M10 x 45mm Button		M10 x 52mm Button Bolt (68)–2
Screw (76)–3			Screw (74)–2
			M10 x 112mm Carriage Bolt (65)–2
1/2” Nylon
Locknut (52)–1
			1/2” x 58mm Bolt (51)–1
			4