12.The Console (5) requires four 1.5V “D” batteries (not included); alkaline batteries are recommend- ed. IMPORTANT: If the ellipical exerciser has been exposed to cold temperatures, allow it to warm to room temperature before insert- ing batteries into the Console. If you do not do this, the console displays or other elec- tronic components may become damaged. See the inset drawing. Remove the battery cover from the Console and insert four batteries into the Console. Make sure that the batteries are ori- ented as shown by the diagram in the battery compartment. Then, reattach the battery cover. Note: The Console (5) can be operated with an optional power supply instead of batteries. To purchase a power supply, call the
Have a second person hold the Console (5) near the Upright (6) as shown. Connect the console wire to the Wire Harness (48). Insert the excess wire downward into the Upright.
Attach the Console (5) to the Upright (6) with four M4 x 16mm
12 |
|
| Battery Cover |
5 |
|
| 5 |
6 | 48 |
79 | Console |
| |
| Wire |
13.Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical exerciser.
11