ProForm 831.28645.0 user manual HOW to USE a Calorie Goal Program

Page 18

HOW TO USE A CALORIE GOAL PROGRAM

Press the Resistance decrease button or begin pedaling to turn on the console.

A moment after you turn on the console, the dis- play will light.

Select one of the calorie goal programs. Press the Programs button repeatedly until the name of the desired calorie goal program appears in the display. When a calorie goal pro- gram is selected, the program time will appear in the display and a profile of the resistance settings for the program will scroll across the matrix in the display.

Begin pedaling to start the program.

Each program is divided into 25, 30, or 45 one- minute segments. One resistance setting and one target rpm (revolutions per minute) setting are programmed for each segment. Note: The same resistance setting and/or target rpm setting may be programmed for two or more consecutive seg- ments. The display for a calorie goal program work in the same way as the display for the cross train- ing programs (see step 3 on page 16).

As you exercise, you will be prompted to keep your pedaling pace near the target rpm setting for the current segment. When the words PEDAL FASTER appear in the display, increase your pace. When the words PEDAL SLOWER appear in the display, decrease your pace. When the words PEDALING IN RANGE appear, maintain your current pace.

Important: The target rpm settings are intend- ed only to provide motivation. Your actual pace may be slower than the target rpm set- tings. Make sure to exercise at a pace that is comfortable for you. Note: If you manually over- ride the resistance settings of a calorie goal pro- gram, you may not reach your calorie goal.

To stop the program at any time, stop pedaling. The time will begin to flash in the display. To restart the program, simply resume pedaling. When the last segment of the program ends, the words PROGRAM DONE will appear in the dis- play.

Follow your progress with the display. See step 4 on page 14.

Measure your heart rate if desired. See step 5 on page 15.

Change the display color if desired. See step 6 on page 15.

Turn on the fan if desired.

See step 7 on page 15.

When you are finished exercising, the console will turn off automatically.

See step 8 on page 15.

18

Image 18
Contents Model No Serial No Sears, Roebuck and Co., Hoffman Estates, ILTable of Contents Important Precautions Before YOU Begin Assembly Page Grease Page 9865 Grease Repeat this step for the Right Pedal Leg not shown Page HOW to USE the Elliptical Exerciser HOW to Level the Elliptical ExerciserHOW to Exercise on the Elliptical Exerciser Features of the Console HOW to USE the Manual Mode Select the manual modeFollow your progress with the display. The left side Your hands or gripping the contacts too tightly HOW to USE a Cross Training Program Select one of the five cross training programsBegin pedaling to start the program Perform the first strength exercise when prompted Continue the cross training programFollow your progress with the display HOW to USE a Calorie Goal Program HOW to USE the High Performance Program Hold the handgrip pulse sensor Handgrip Pulse Sensor Troubleshooting Maintenance and TroubleshootingConsole Troubleshooting HOW to Adjust the Drive BeltConditioning Guidelines Warning Strength Training Guidelines Part LIST-Model No Key No. Qty DescriptionQty Description ModelNo Exploded Drawing B-Model No DAY Full Warranty Get it fixed, at your home or ours